**Warning serial data is bad**

micky0908

Inactive User
Joined
Mar 14, 2005
Messages
534
Reaction score
5
Hi all I am trying to do a lite on using ck3 pro an probe but keep getting this error when trying to dump the key, have done a few before all went fine untill this one, any ideas why this is giving me this error?????


Regards


mick
 
is it back from mircosoft? is it asking you to repair it?
 
it has a repair sticker on it mate and no it says nothing about repairing it
 
What version Lite-on is it, check the label.
 
Sending DVDKey request to I/O port 0xEF00 and COM1

................ Serial Data is bad,

DVDkey files extraction aborted!


Thats what Ikeep getting from it chaps!!!!
 
Is the probe lighting up Green when you put it in the R707 hole?
 
You sure your selecting the right COM port>?
 
yes mate correct port is selected, its showing the drive properties
 
Thats the Sata port, The COM port is the one of concern when dumping the key over Serial, Ie: COM 1/2/3


Other thing is, is the Tray in the half open/closed status mode.
 
got it sorted mate, used a pals ck3 all worked ok dunno if my ck3 is fooked or what

cheers for your help Cisk

regards

mick
 
mine had thios exact same problem

buy a serial to usb cable from ebay and itll work just fine, the one i bought had a faulty usb connector

check where usb plugs in to see if its heating up after 20 mins. If its cold then thats your problem for sure (thats the chip adjacent to the usb socket on the CK3)
 
Back
Top