Vu+Solo 2 H/W Error

[Aliraza63]

Hi all
I have Vu+solo2 clone I was using Blackhole Image but accidently updated it Now its showing H/W error . Kindly tell me how can recover it back to work . How can update old image ?
Thanks

 

[doch]

if you have a clone, never_never software updated
I don´t know if will be possible donwgrade

 

[Ferret]

Just revert to flashing as normal a older image BH 2.0.7 should be OK.

There are a couple of threads on here regarding patching the newer images with older drivers.

You could use this image to recover with.

OpenPli 4.0 For VU Solo2 Clone (SAFE) - Downloads - Digitalworldz

 

[doch]

only flashing OpenPLi 4.0 (SAFE) remove the problem H/W error??

This image is possible "update" or no

 

[Ferret]

only flashing OpenPLi 4.0 (SAFE) remove the problem H/W error??

This image is possible "update" or no

Most PLI image will update fine but do so at your own risk, youll only have to reflash anyway.

As for the remove HW error any image before 24/12/13 should be able to do this.

 

[AJT]

if you have a clone, never_never software updated
I don´t know if will be possible donwgrade

Read through some threads..as ferret said if you ever get H.W error its no biggie just flash an appropriate image the normal way..flashing non clone safe image,s does nothing to the box except giving the error and not booting.
There are in downloads 3 or 4 images marked clone safe so take your pick.
any genuine image dated before 17/12/13 is fine on a solo 2 clone just not up-datable.

 

[Aliraza63]

Thanks u all for the kind reply and help. thanks to ferret AJT . problem solved after flashing old image.