VU+ Duo CCcam & Mgcamd problem

[jammoboss]

Hi all

I have been using cccam 2.3.0 for a while now but notice some glitching/freezing/pixilation. I tried several test servers but I had the same issue, tried different images which never solved the problem.

I thought it might be my broadband and changed the channels to see if this would help which it never.

I decided to install mgcamd 138 which I have never used. For some reason when using mgcamd some channels won’t work they just stay blank but if I turn cccam on the channel works. Can somebody help me? Have I inserted the lines wrong?

I have two nlines and all I did was

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = Servername.*****.** 12345 abcdefghij 12345678 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS_MULTIPLE = Servername2.*****.** 12345 abcdefghij 12345678 01 02 03 04 05 06 07 08 09 10 11 12 13 14

I did not put anything in the mg_cfg because i am not sure if i had to

Many thanks

 

[Abu Baniaz]

mgcamd wont work without mg_cfg

 

[Ferret]

Hi all

I have been using cccam 2.3.0 for a while now but notice some glitching/freezing/pixilation. I tried several test servers but I had the same issue, tried different images which never solved the problem.

I thought it might be my broadband and changed the channels to see if this would help which it never.

I decided to install mgcamd 138 which I have never used. For some reason when using mgcamd some channels won’t work they just stay blank but if I turn cccam on the channel works. Can somebody help me? Have I inserted the lines wrong?

I have two nlines and all I did was

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = Servername.*****.** 12345 abcdefghij 12345678 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS_MULTIPLE = Servername2.*****.** 12345 abcdefghij 12345678 01 02 03 04 05 06 07 08 09 10 11 12 13 14

I did not put anything in the mg_cfg because i am not sure if i had to

Many thanks

If you run a search for mgcamd there is a lot of discussion on the mg_cfg setup and youll also find other members configs posted on the threads. You have to have a cfg.

 

[Oily]

Wonder if this is my problem too,I'm using CCcam and get freezing etc.MgCamd looks complicated though lol

 

[Ferret]

Oscam is the way to go these days and it will out perform CCcam as it using the ECM cache system.

 

[Oily]

Oscam is the way to go these days and it will out perform CCcam as it using the ECM cache system.

Is there an idiots guide setting up oscam anywhere?

 

[Ferret]

Is there an idiots guide setting up oscam anywhere?

Are you just running lines or are you running a server ?

 

[Oily]

Are you just running lines or are you running a server ?

Just running a line Ferret

 

[digi247]

Just running a line Ferret

if your line begins with N: then use Mgcamd as this will still use the Cache feature of Oscam servers Far superior to CCcam