First you need to get on the newest Kinect Dash. To do that use Easy freeboot 0.4. I have used it and it works extremely easily.
Download:
1. Open EFB
2. Check needed option(s)
Donor Files - I have not tested so Use at own risk
Aud_Clamp Fix. Also known as Alt SMC- if this is done on your box
you must check this.
If incorrectly checked/unchecked your box will not
boot
3. Select your Nand image
I used original unsure if XBR/freeboot will work
4. Enter your Cpu key
5. Verify motherboard revision
6. Allow dos Prompt to finish and save your New nand
Now you need to get this on your Xbox
1. Make sure new nand is named updflash.bin
2. Place on usb drive and insert into Xbox
3. Boot Xbox using eject key to start Xellous
4. Xbox will auto update and prompt to power cycle when done
5. Unplug xbox for 10 seconds and then plug in and try to boot
Assuming all previous steps have completed properly move on to getting avatar/ Kinect support.
1. Download 12611 update
Download:
Code:
2. Copy the contents of the .zip file to the root directory of your flash drive.
3. Unplug the USB flash drive from your computer.
4. Plug the flash drive into a USB port on your Xbox 360 console.
5. Restart the console.
6. When the console restarts, the installation program starts automatically.
Select Yes when you are prompted to update the new console
software.
Finally Install DashLaunch 2.03
1. Download:
Code:
2. Copy Installer Folder onto Xbox HDD either through USB or FTP
3. Run default.xex from FSD file-browser
4. Follow on screen Prompts.
All credits for this tutorial go to belenos
Download:
Code:
You don't have permission to view the code content. Log in or register now.
1. Open EFB
2. Check needed option(s)
Donor Files - I have not tested so Use at own risk
Aud_Clamp Fix. Also known as Alt SMC- if this is done on your box
you must check this.
If incorrectly checked/unchecked your box will not
boot
3. Select your Nand image
I used original unsure if XBR/freeboot will work
4. Enter your Cpu key
5. Verify motherboard revision
6. Allow dos Prompt to finish and save your New nand
Now you need to get this on your Xbox
1. Make sure new nand is named updflash.bin
2. Place on usb drive and insert into Xbox
3. Boot Xbox using eject key to start Xellous
4. Xbox will auto update and prompt to power cycle when done
5. Unplug xbox for 10 seconds and then plug in and try to boot
Assuming all previous steps have completed properly move on to getting avatar/ Kinect support.
1. Download 12611 update
Download:
Code:
Code:
You don't have permission to view the code content. Log in or register now.
2. Copy the contents of the .zip file to the root directory of your flash drive.
3. Unplug the USB flash drive from your computer.
4. Plug the flash drive into a USB port on your Xbox 360 console.
5. Restart the console.
6. When the console restarts, the installation program starts automatically.
Select Yes when you are prompted to update the new console
software.
Finally Install DashLaunch 2.03
1. Download:
Code:
Code:
You don't have permission to view the code content. Log in or register now.
2. Copy Installer Folder onto Xbox HDD either through USB or FTP
3. Run default.xex from FSD file-browser
4. Follow on screen Prompts.
All credits for this tutorial go to belenos