Tit2 flash failing

[Bally12345]

Trying to program a tit2 card for a mate opened Tit. 1 & 2 Programmer erased the card

-> success: Titanium Card OS has been restored (virgin state).

Loaded the flash files and pressed "burn it!"

Then get

ATR : 3B EC 00 00 40 32 54 49 54 41 4E 49 55 4D 00 13 02 01
Titanium2 SmartKey Card OS Version 02.01 found
authenticate...
80 82 00 00 08 43 52 59 50 54 4F 53 00 -> 90 00
-> success: authenticate !
setting cryptkey...
80 86 00 00 80 72 F3 49 74 DC F2 FD 22 5F D9 5A 58 F7 B7 89 B0 CC 0B A7 6D B5 2B F9 D7 EC 54 76 71 1D 7A 62 75 4F 5E 91 26 D1 D2 21 A0 CE 5A 55 D1 F2 57 E6 72 87 C3 66 DB FE D8 A1 50 62 DD E1 06 A3 BC D8 84 C6 EB A4 6B E1 D7 25 9B 1A 1D A7 25 1A 5A AB BB 9D B2 16 6B A2 17 DF 60 72 A7 92 8A 15 A6 D1 28 E6 07 83 5B 8F 7C 09 05 3A FD AB 03 09 96 B9 6F 5A 64 FD D3 91 41 82 49 2E BC 93 1B 24 B2 6B 50 -> 90 00
-> success: cryptkey accepted !
select flash...
80 70 80 00 00 -> 90 00
-> success: selecting flash !
writing flash...
80 D7 00 00 80 0E D7 F8 65 14 8E 80 A5 8D 93 52 76 5E 14 4A 25 09 4C CE F8 3A E8 41 CC 58 26 24 63 B9 0E 95 E1 4B 8A C9 27 6E 9C 2F 6E 4A AF AE 9A D5 46 A2 9E CB C9 ED 70 FF 2A 80 12 C3 1B EB 04 E3 99 55 8B D2 66 C7 38 91 3D 4B 2B D4 9F 7E FE F4 80 75 4B 89 5E CC 9C D2 7A C1 C8 B1 49 5C 46 B0 F0 DD 8D 5A FF 41 69 A9 71 22 6A 42 BB B4 27 39 A5 71 F5 57 E2 FE E5 00 A4 1E C5 91 D2 38 65 70 14 D6 58 ->
-> error: writing flash failed !

Got Infinity USB Unlimited proggy set to pheonix mode 3.680 Mhz. Tried setting it to 3.58 using custom freq but got same thing...

Can anyone shed some light on what I am doing wrong?

 

[mxwizard]

after erasing the card are you also resetting it before loading .hex, .eep and key?

 

[Bally12345]

Ahh you have to reset after erase... Didnt know that will try again thanks

 

[Bally12345]

Hmm still getting

-> error: writing flash failed !

 

[nickgen]

use the programmers own software to load the flash, eep and cryptkey set it to tit2 mode first,if you get an error when you select the files ignore it and write anyway, you dont need to set the phoenix mode till you enable the virtual com port which you do after writting the flash files to the card, when you are then using winex, ive never used tit programmer just the software that came with the thing in the first place and its always worked for me.

ps before trying to prog the card always erase it first.

 

[oxkiller]

try and run programmer on 3.58

 

[Bally12345]

use the programmers own software to load the flash, eep and cryptkey set it to tit2 mode first,if you get an error when you select the files ignore it and write anyway, you dont need to set the phoenix mode till you enable the virtual com port which you do after writting the flash files to the card, when you are then using winex, ive never used tit programmer just the software that came with the thing in the first place and its always worked for me.

ps before trying to prog the card always erase it first.

Thanks, tried using the proggys software and it flashed it straight away, then wrote image using winexp and now all is working

:THANKS:​

 

[logic_187]

Thanks, tried using the proggys software and it flashed it straight away, then wrote image using winexp and now all is working

:THANKS:​

bally you sure you using the correct files??

 

[Bally12345]

bally you sure you using the correct files??

Yep because its working imp: