• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Tip on fixing the three red lights.

parker13

VIP Member
VIP Member
Joined
Jul 24, 2005
Messages
1,406
Likes
12
#1
Hi, just had a 360 in to repair, I fitted the x clamps but the three red lights remained, I then reflowed the surface mounted I.C, above the square heatsink with a hot air station and it cured the fault, The chips circuit reference is U4B1, If you try it yourself use flux and set the air on the hot air station very low so you don,t blow any of the tiny surface mounted components around the chip off the board.
 

deedie

VIP Member
VIP Member
Joined
Nov 21, 2005
Messages
3,509
Likes
44
#2
Hi, just had a 360 in to repair, I fitted the x clamps but the three red lights remained, I then reflowed the surface mounted I.C, above the square heatsink with a hot air station and it cured the fault, The chips circuit reference is U4B1, If you try it yourself use flux and set the air on the hot air station very low so you don,t blow any of the tiny surface mounted components around the chip off the board.
you will get more help in the XBOX360 section. this is the xbox section
 

parker13

VIP Member
VIP Member
Joined
Jul 24, 2005
Messages
1,406
Likes
12
#3
Thanks for that although I was offering help, not asking for it, thanks for moving it to the correct forum though.