Struggling with hdd on a dm600

bert1

Member +
Joined
Jun 26, 2005
Messages
818
Reaction score
4
Location
on location
as above suggests really.....cant get the box to recognise the file extension system (ext3) and also it does not recognise the correct disk size (80gb) or manufacturer - but it does recognise that a hdd is there....

hdd is a WDC 80gb 2.5inch and I noticed that there was no jumper on the connection....that did set me wondering as where to attach the thing ....as wherever you place it to the connection -there appears to be something that looks as if it should be connected but isnt....(there are less holes in the socket attached to the cable - than pins in the connection bit of the hdd) -

hope ive explained clearly enuff.....and if ive done sumthin stupud to make to make u p*$$ urself laughing -great.LOL ......it means it shouldnt be too difficult to sort..... any help appreciated...

cheers
Rob
 
Last edited:

bert1

Member +
Joined
Jun 26, 2005
Messages
818
Reaction score
4
Location
on location
Ok...problem solved...took it apart and put it back together again and its working...
not a clue as to the problem........

anyway up & running-cheers
 
TEST
Top