starview usb 2
- Thread starter nomisgg
- Start date
You need to download the "TheboxSuperUSB2_v2.05.091023" firmware onto a USB memory stick, you should be able to find it in the Sticky: All Cables Files Here.
1) Once you have downloaded (make sure the file is opened and not zipped) the firmware on your USB memory stick plug the stick into the USB port in your box.
2) Switch the box on, press OK for English on the Language page and go to USB at the bottom of the screen.
3) Press the right cursor or OK to highlight USB on the right hand side of the screen, then press OK to find the file you have saved on the USB memory stick "TheboxSuperUSB2_v2.05.091023".
4) Highlight the "TheboxSuperUSB2_v2.05.091023" file press OK, confirm Data Restore Yes by pressing OK then you will see the file start loading into the Box.
Do not touch the remote or the Box until the Box resets to shows the Language menu otherwise you might end up with a bad flash or a dead box permanently displaying 8882 on the display.
5) Press OK on English in the Language menu, then press the right cursor on Installation to highlight Automatic Scan on the right hand side of the screen, press OK to show TW or NTL or Ex C&W (depending which area you live in and OK again to start scanning, takes approx 5 minutes to complete.
6) After scanning it should automatically show BBC1 (101), press Menu and then 1570 to show the secret System Menu.
7) Move the cursor down to KeyCode and then move the cursor right to turn the KeyCode on, press Exit 3 times.
8) Go to Sky Sports 1 (511) and wait for the screen to update approx up to 1 minute (if there is no change after a minute, just change the channel to Sky Sports 2).
Once updated you should have all Premium/Pay channels, to check go to another Sport channel or Film channel.
9) Switch off the box and remove the USB memory stick from the USB port at the back of the box and then switched the box back on.
Happy Viewing
1) Once you have downloaded (make sure the file is opened and not zipped) the firmware on your USB memory stick plug the stick into the USB port in your box.
2) Switch the box on, press OK for English on the Language page and go to USB at the bottom of the screen.
3) Press the right cursor or OK to highlight USB on the right hand side of the screen, then press OK to find the file you have saved on the USB memory stick "TheboxSuperUSB2_v2.05.091023".
4) Highlight the "TheboxSuperUSB2_v2.05.091023" file press OK, confirm Data Restore Yes by pressing OK then you will see the file start loading into the Box.
Do not touch the remote or the Box until the Box resets to shows the Language menu otherwise you might end up with a bad flash or a dead box permanently displaying 8882 on the display.
5) Press OK on English in the Language menu, then press the right cursor on Installation to highlight Automatic Scan on the right hand side of the screen, press OK to show TW or NTL or Ex C&W (depending which area you live in and OK again to start scanning, takes approx 5 minutes to complete.
6) After scanning it should automatically show BBC1 (101), press Menu and then 1570 to show the secret System Menu.
7) Move the cursor down to KeyCode and then move the cursor right to turn the KeyCode on, press Exit 3 times.
8) Go to Sky Sports 1 (511) and wait for the screen to update approx up to 1 minute (if there is no change after a minute, just change the channel to Sky Sports 2).
Once updated you should have all Premium/Pay channels, to check go to another Sport channel or Film channel.
9) Switch off the box and remove the USB memory stick from the USB port at the back of the box and then switched the box back on.
Happy Viewing
roud:Similar threads
