rom11 boc help needed

cashmere

Inactive User
Joined
Nov 16, 2004
Messages
237
Likes
1
#1
just after running the multiprovider script on this card and this is what iam getting

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 43 3B
ROM Revision: 011
EEPROM Revision: RevB0C
ProviderID: 00
CamID: 40 3C 62 01
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful

i noticed my provider ntl has changed to 00 and iam no longer able to try the script again"card didnt return a valid provider"

i dont need any info from the card if that makes it any easier,just for a spare

any ideas guys?
 

TBC

DW Regular
Joined
May 5, 2005
Messages
4,015
Likes
50
#2
shut down and reboot your pc then try again! you may have a comms error i've had this before!
 
Joined
Dec 6, 2004
Messages
383
Likes
1
#3
read in xncs (ie tick all settings) copy eeprom line c040 then shut it down then read in rom studio . then you should be able to read in nagra
 

cashmere

Inactive User
Joined
Nov 16, 2004
Messages
237
Likes
1
#4
tried all that,,will not read with xncs

3 tries then comes up couulnt dump card

ps i did enter 5401 for provider
 

cashmere

Inactive User
Joined
Nov 16, 2004
Messages
237
Likes
1
#6
it wont let me glitch again...think its because the provider id has changed to 00

any ideas
 

TBC

DW Regular
Joined
May 5, 2005
Messages
4,015
Likes
50
#7
cashmere said:
it wont let me glitch again...think its because the provider id has changed to 00

any ideas
oh well i guess thats that then < best to stick it in the cupboard mate
 

corey

Inactive User
Joined
Nov 3, 2005
Messages
147
Likes
1
#8
in xncs make sure its in win 98 mode tick all settings in file go to yellow triangle click under dev leave it send packets all night you should now be able to read eprom in xncs write down lines c40,cc50,c60 and c70 these are passwords bd0,1,2+3 open rom studio when asked for password try line c40 it should now read change the above four lines to 88888888888888888888888888888888 and write now open nagra when asked for password type in 32 *8 it should now open
 
TEST
Top