rom11 boc help needed

[cashmere]

just after running the multiprovider script on this card and this is what iam getting

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 43 3B
ROM Revision: 011
EEPROM Revision: RevB0C
ProviderID: 00
CamID: 40 3C 62 01
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful

i noticed my provider ntl has changed to 00 and iam no longer able to try the script again"card didnt return a valid provider"

i dont need any info from the card if that makes it any easier,just for a spare

any ideas guys?

 

[TBC]

shut down and reboot your pc then try again! you may have a comms error i've had this before!

 

[dannyrp03]

read in xncs (ie tick all settings) copy eeprom line c040 then shut it down then read in rom studio . then you should be able to read in nagra

 

[cashmere]

tried all that,,will not read with xncs

3 tries then comes up couulnt dump card

ps i did enter 5401 for provider

 

[TBC]

send packet3 again or run it through the glitcher a second time

 

[cashmere]

it wont let me glitch again...think its because the provider id has changed to 00

any ideas

 

[TBC]

it wont let me glitch again...think its because the provider id has changed to 00

any ideas

oh well i guess thats that then < best to stick it in the cupboard mate

 

[corey]

in xncs make sure its in win 98 mode tick all settings in file go to yellow triangle click under dev leave it send packets all night you should now be able to read eprom in xncs write down lines c40,cc50,c60 and c70 these are passwords bd0,1,2+3 open rom studio when asked for password try line c40 it should now read change the above four lines to 88888888888888888888888888888888 and write now open nagra when asked for password type in 32 *8 it should now open