Openbox S9 HD with 160gb internal HDD

[brianmullen8]

For sale is my openbox S9 that i have installed a 160gb internal Hdd.


I have put a switch on the back that disables the internal hdd so the usb port is still useable for firmware updates ect....

It has the latest firmware installed and is ready to use.

I'm looking for £160 delivered.


Thanks

 

[Mark_The_Yid]

the box is only a 1-er brand new. A very expensive hard drive me thinks!

 

[brianmullen8]

You may not have known but these don't come with the option of an internal hdd I have done alot of mods to allow an internal hdd to be used. See my tut if your interested.

 

[Mark_The_Yid]

my bad! sorry

 

[rutters]

How do these compare to a Dm800 and do they do the same thing?

 

[brianmullen8]

It's a plug and play box. It is more stable than my dm600 and my dm800

It does cccam, you can input using remote or u can just copy your cccam.cfg to usb and copy it over.

Recording is a lot easier it has an actual record button unlike dreamboxes.

It doesn't over heat like the dm800.

HD is a lot better on these compared to the dm800

It's a great box if you don't want to mess around

Have a look in the openbox forum for more info.

 

[ekwat]

It's a plug and play box. It is more stable than my dm600 and my dm800

It does cccam, you can input using remote or u can just copy your cccam.cfg to usb and copy it over.

Recording is a lot easier it has an actual record button unlike dreamboxes.

It doesn't over heat like the dm800.

HD is a lot better on these compared to the dm800

It's a great box if you don't want to mess around

Have a look in the openbox forum for more info.

So keep this and sell your dm600 and dm800

 

[rutters]

Can it be used wirelessly (using something like FileZilla) to send files to it?

Can it drive a Diseqc motor?

I want rid of my Dm800 cos of the glitching!!

 

[brianmullen8]

it can drive a Diseqc motor ok.

There are currently no ftp access but it might be added in a later firmware.

All file transfers are currently done using usb.

 

[brianmullen8]

So keep this and sell your dm600 and dm800

I don't use the dm800, and the dm600 is my server but looking to replace this as it goes down 2-3 times a week

 

[brianmullen8]

Can it be used wirelessly (using something like FileZilla) to send files to it?

Can it drive a Diseqc motor?

I want rid of my Dm800 cos of the glitching!!

Here is the official specs

MORE SPECIFICATIONS ABOUT OPENBOX S9 HD PVR receiver
DVB-S2
Input Frequency:950~2150MHz

Loop Out Frequency:950~2150MHz

Input Level:-65~-25dBm

Input Impedance:75¦¸

LNB Power: Auto/14v/18v/OFF, Imax = 500mA
Video decoder
Video Compression MPEG-2 and MPEG-1 compatible, H.246

Video Formats 4:3 / 16:9

Letterbox for 4:3 TV-Device
Audio decoder
Audio Compression MPEG-1 & MPEG-2 Layer I and II, MP3

Audio Mode Dual (main/sub), Stereo

Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output digital
Output Level 0,5 Vss on 75 Ohm

Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz

S/PDIF-Output optical, Toslink
Video parameter
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm

Teletext filter in conformity with ETS 300 472 Standard
TV-Scart
Output: FBAS, RGB, S-Video
Serielle Interface RS 232
Typ RS232 bidirectional

Bit rate 115,2 kBit/s max.

Plug Connector SUB-D-9

Function: Update of Firmware
Ethernet
10/100 MBit compatible interface

Function: Update of Firmware
USB
1 x USB 2.0 Host ,PVR
LNB power and polarisation per tuner
LNB Current 500mA max.; short-circuit-protected

LNB Voltage vertical < 14V no load, > 11,5V at 400mA

LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
Count of active satellite position
DiSEqC 1.0/1.1/unicable/1.2 SAT POSITION / SAT OPTION

DiSEqC - Rotor Control
External PSU
Input:110-240V AC / 50-60Hz / 0,6A

Output: 12V = / 3,0A
Physical specification
Ambient Temperature +15 °C...+35 °C

Humidity < 80%

Size (W x D x H): 300 mm x 220 mm x 56 mm

Weight: 1,8 kg* without HDD
Power
AC input range:100-240VAC 50/60Hz

Power Consumption (Standby): Max. 10W (<1 W)*

 

[Yosser2000]

Can it be used wirelessly (using something like FileZilla) to send files to it?

Can it drive a Diseqc motor?

I want rid of my Dm800 cos of the glitching!!

My sister has one, its great BASIC box, good picture etc, only has a now and next epg and you cant ftp to it etc as its closed source. You can pick em up for £95, i think it can drive motor but not 100%

regards

Yosser

 

[brianmullen8]

Reduced to £140

 

[MUS]

Hi Brian
Are you still offering this?

Btw Am I just stupid, or is it actually difficult to compose a PM on this forum!!

 

[brianmullen8]

No mate its gone, I have a dm600 with 80gb hdd if your interested

 

[Mark_The_Yid]

Btw Am I just stupid, or is it actually difficult to compose a PM on this forum!!

I think you need more posts b4 you can use pm m80

 

[Napster]

No mate its gone, I have a dm600 with 80gb hdd if your interested

post a picture of it m8 , you know the rules

 

[Mark_The_Yid]

post a picture of it m8 , you know the rules

he already has m8

https://www.digitalworldz.co.uk/index.php?threads/251568/

 

[Napster]

he already has m8

https://www.digitalworldz.co.uk/index.php?threads/251568/

i ment in the post above