• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

No Ranging Response received - T3 time-out

CheesyPeteza

Inactive User
Joined
Feb 19, 2007
Messages
81
Likes
0
#1
This one is weird. The cable modem works fine some of the time, but then it will just stop working, when I reset I get these messages below. It can't get past this to connect. A few hours later, or the next day it will connect fine.

I have two NTL 200's and both have the same problem.

Code:
CM> ## Ranging Upstream Channel at 61db for 9 times
Beginning initial ranging...
Using default (wacky stored value) initial upstream power = 11.0 dBmV

Received a UCD for Upstream Channel 3!

Received a UCD for Upstream Channel 4!

Received a UCD for Upstream Channel 1!
CM> Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 27.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 14.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 55.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 49.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 42.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 36.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 30.0 dBmV...
Logging event: No Ranging Response received - T3 time-out