need help with Flashing SB400

snoopydastar

Inactive User
Joined
Feb 27, 2008
Messages
4
Reaction score
0
im new to this an i need help with Flashing SB400

Software Version: SB4100-1.4.9.0-SCM00-NOSH
Hardware Version: 0
MIB Version: II
GUI Version: 1.0
VxWorks Version: 5.3



its not working on netboot



so can some one help me
 
im new to this an i need help with Flashing SB400

Software Version: SB4100-1.4.9.0-SCM00-NOSH
Hardware Version: 0
MIB Version: II
GUI Version: 1.0
VxWorks Version: 5.3



its not working on netboot



so can some one help me
thats a lock f/w!!! u can change the mac using bitfile method or u can use a max232 to change the f/w
 
set nic to 192.168.100.10
open proggy and select english
hit box top left then uncheck box auto ip and paste your modems hfc mac into box at top then activate factory mode, you will see tftp(mind have in same folder) doing it shit
i then leave as is and open CMFirm3 and load SB4100-0.4.4.5-SCM01-NOSH-2.01.hex
you should get a pop up box and hit
you probably wont see anything happenging after it says forcing download but give a few mins and will say complete
 
set nic to 192.168.100.10
open proggy and select english
hit box top left then uncheck box auto ip and paste your modems hfc mac into box at top then activate factory mode, you will see tftp(mind have in same folder) doing it shit
i then leave as is and open CMFirm3 and load SB4100-0.4.4.5-SCM01-NOSH-2.01.hex
you should get a pop up box and hit
you probably wont see anything happenging after it says forcing download but give a few mins and will say complete



i have no idea what your talkin about ,im so lost :(
 
Back
Top