Nagra Hex Block Decryption Research

...hi friend , the card is initialized very well also without any cople nuid+cwpk , unfortunately this is not enough to clear channels , I have no dubt than you know it and why . Personally I tried with different "false couple" but no chance !
Without nuid and decrypt cwpk, no party.
 
Without nuid and decrypt cwpk, no party.
I know this but maybe there is a mistake : I read than rumas suggest to use flase ( or casual nuid + cwpk ) to have clear the channels , for this I tried a lot off them having this results :

  • 2023/04/02 16:31:48 60F271D5 c (ecm) dvbapi (1856:000000:1466/007A/AF:HOP:00): found (127 ms) by BLCK1856 - Canale5 HD (tier NULL | CWPK0) (lg)
  • 2023/04/02 16:32:03 60F271D5 c (ecm) dvbapi (1856:000000:1466/007A/AF:HOP:00): found (128 ms) by BLCK1856 - Canale5 HD (tier NULL | CWPK0) (lg)
let's hope some one brave can help to have the way we must find the correct CWPK0 or extract it !
 
I know this but maybe there is a mistake : I read than rumas suggest to use flase ( or casual nuid + cwpk ) to have clear the channels , for this I tried a lot off them having this results :


let's hope some one brave can help to have the way we must find the correct CWPK0 or extract it !
No, this is mistake.
Him say card start OK, of course if your not have correct data this never open channel
 
@diegobrsul

As a new member it's not good practice to spam the forum by posting the same question on 5 different threads :(. Please be patient and wait for an answer.
 
Hi,

Can somebody help me with finding mod1 and mod2 for UPC Cable Nagra CAK7?

Regards,
DJWeed
 
I think you're looking for this.

MOD1: 816249...//...62683E099
MOD2: D166D...//...9B336A415

Cau Adas
 
Yes, but I can't see all the characters of this mods. Can You post me PM with it please?

Regards,
DJWeed
 
I think I found it :) Thanks for lighting the way!

Regards,
DJWeed
 
For now I am not sure about mod2, mod1 looks correct in accordance to @adas post. Maybe someone can confirm the correction of data below?

mod1 = 816249639463A9441F505C81FBCZ4B926Z65MJMQ8COMHXQM8PXURVLXE743F40F4BRDE29RXP5QCC2LSODBC2DQBZXCXD6NK1G1MRU4NUMXAHNFBEJHKTZV9HDAL4GFUNBXLPC3BEMKLGAPBF5VWTANQUHOJVBRUJRSPHYEHT0B0E9ADDD01E1C733764B2EFAA1BD53C5DD4F71F610E262683E099

mod2 = D1FBCZ4B926Z65MJMQ8COMHXQM8PXURVLXED3E533B884A04FECCD4B75AFDCBE334DD8EF8025372B01C3D6F926E62D56704BRDE29RXP5QCC2LSODBC2DQBZXCXD6NK1G1MRU4NUMXAHNFBEJHKTZV9HDAL4GFUNBXLPC3BEMKLGAPBF5VWTANQUHOJVBRUJRSPHYEHT0F1CFEECBE9759D57969B1F7E690531246401E2AECCD99B336A415

Regards,
DJWeed
 
Where we found this mods 1 and 2? Any chance from dump?

thx

No way to test my card

I tried "global" data from "samples/tests" from some compiled oscam.server and no luck:

2023/03/24 17:46:08 2911E182 r (reader) reader0_hd+_hd04 [internal] Rom revision: DNASP420 RevS60
2023/03/24 17:46:08 2911E182 r (reader) reader0_hd+_hd04 [internal] Card has DT05_00
2023/03/24 17:46:08 2911E182 r (reader) reader0_hd+_hd04 [internal] DT05_00 error - check MOD1
2023/03/24 17:46:08 2911E182 r (reader) reader0_hd+_hd04 [internal] Card has DT05_10
2023/03/24 17:46:08 2911E182 r (reader) reader0_hd+_hd04 [internal] OTP CSC No. of keys: 00 01
2023/03/24 17:46:08 2911E182 r (reader) reader0_hd+_hd04 [internal] OTA CSC No. of keys: 00 00
2023/03/24 17:46:11 2911E182 r (reader) reader0_hd+_hd04 [internal] card is not responding to CMD02/E - check your data
========================

For those I've already asked for help with, it's just for learning purposes as I've mentioned. Many think that I'm going to set up a private server, but that's not my interest.

Thx
 
Maybe someone can help us with correction mod1/mod2 for UPC. I hope so. Confirmation of mod1 above will be also helpful.

Regards,
DJWeed
 
But my I need for other provider.. not for UPC. I don't know this provider.
 
Back
Top