Nagra Hex Block Decryption Research

Show Init log

Cau Adas
Init Oscam log from my card?

If you're talking to me, I have a part, because I don't know what you need to see and this is a old log

Since I don't have access to private messages here and I sent you more details in the "other" forum, I don't know what you need to start with.

As I didn't get anything with this card, an official receiver is being used and I did the tests a while ago. For recent log I need to insert again the settings.

2023/03/24 17:17:05 2FA20147 p (constcw) Local reader: SoftCam.Key (file: /etc/tuxbox/config/oscam-smod/SoftCam.Key)
2023/03/24 17:17:05 2FA20147 p (reader) SoftCam.Key [constcw] proxy initialized, server /etc/tuxbox/config/oscam-smod/SoftCam.Key:0
2023/03/24 17:17:05 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2023/03/24 17:17:05 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] Reader sci internal, detected box type: mybox
2023/03/24 17:17:05 1D68D587 h (webif) webif: decompressed 206740 bytes back into 530616 bytes
2023/03/24 17:17:05 1D68D587 h (webif) HTTP Server running. ip=:: port=XXX
2023/03/24 17:17:06 18FEFD15 r (reader) emulator [emu] card detected
2023/03/24 17:17:06 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] card detected
2023/03/24 17:17:06 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] ATR: 3F FF xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2023/03/24 17:17:06 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] Astra HD+ HD02/HD03/HD04/HD05 recognized
2023/03/24 17:17:07 18FEFD15 r (reader) emulator [emu] found card system emu
2023/03/24 17:17:07 18FEFD15 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2023/03/24 17:17:07 18FEFD15 r (emu) Reading key file: /etc/tuxbox/config/oscam-smod/SoftCam.Key
2023/03/24 17:17:07 18FEFD15 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:94 G:0 P:1443 T:53 A:0
2023/03/24 17:17:07 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] detected card in CAK7 mode
2023/03/24 17:17:07 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] Initial AES: 6C XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
2023/03/24 17:17:08 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] Rom revision: DNASP420 RevS60
2023/03/24 17:17:08 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] Card has DT05_00
2023/03/24 17:17:08 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] DT05_00 error - check MOD1
2023/03/24 17:17:08 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] Card has DT05_10
2023/03/24 17:17:08 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] OTP CSC No. of keys: 00 01
2023/03/24 17:17:08 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] OTA CSC No. of keys: 00 00
2023/03/24 17:17:10 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] card is not responding to CMD02/E - check your data
2023/03/24 17:17:10 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] card system not supported
2023/03/24 17:17:10 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] Normal mode failed, reverting to Deprecated Mode
2023/03/24 17:17:11 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] ATR: 3F FF XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
2023/03/24 17:17:11 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] Astra HD+ HD02/HD03/HD04/HD05 recognized
2023/03/24 17:17:14 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] Warning: Card returned error on setting ifsd value to 251
2023/03/24 17:17:14 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] detected card in CAK7 mode
2023/03/24 17:17:14 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] Initial AES: 6C XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
2023/03/24 17:17:15 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] Rom revision: DNASP420 RevS60
2023/03/24 17:17:19 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] OTP CSC No. of keys: 00 01
2023/03/24 17:17:19 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] OTA CSC No. of keys: 00 00
2023/03/24 17:17:22 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] card is not responding to CMD02/E - check your data
2023/03/24 17:17:22 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] card system not supported
2023/03/24 17:17:22 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2023/03/24 17:17:22 7A27CBF4 r (reader) reader0_hd+_hd04 [internal] card initializing error
2023/03/24 17:17:22 00000000 s (main) init for all local cards done
2023/03/24 17:17:22 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2023/03/24 17:17:22 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2023/03/24 17:17:22 00000000 s (anticasc) anti cascading disabled
2023/03/24 17:17:22 00000000 s (gbox) local gbox failed init
2023/03/24 17:17:22 349A844F c (client) plain dvbapi-client granted (mybox, au=auto (6 reader))
2023/03/24 17:17:22 349A844F c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-smod/oscam.ccache
2023/03/24 17:17:22 349A844F c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
2023/03/24 17:17:22 349A844F c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 96
2023/03/24 17:17:22 349A844F c (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket...
2023/03/24 17:17:22 349A844F c (dvbapi) PMT mode 6: Successfully connected to CA PMT server (fd 17)
2023/03/24 17:17:22 349A844F c (dvbapi) Demuxer 0 ecmpid 0 CAID: xxx ECM_PID: 1409 PROVID: 000000
2023/03/24 17:17:22 349A844F c (dvbapi) Demuxer 0 ecmpid 1 CAID: xxx ECM_PID: 1404 PROVID: 000000
2023/03/24 17:17:22 349A844F c (dvbapi) Demuxer 0 found 3 ECM pids and 3 STREAM pids in CA PMT
2023/03/24 17:17:22 349A844F c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2023/03/24 17:17:27 349A844F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/03/24 17:18:07 349A844F c (-) -- Skipped 8 duplicated log lines --

But thanks anyway
 
According to the default settings, I think need:

mod1 =
data50 =
mod50 =
key60 =
exp60 =
nuid =
cwekey = (decrypted)

I think these two mods are just to start the card. As I also don't have the other data and I think it's practically "impossible" to get them, I won't be lucky to watch any channel on my enigma2 receiver. But it was worth learning in some forums to do my tests.
 
According to the default settings, I think need:

mod1 =
data50 =
mod50 =
key60 =
exp60 =
nuid =
cwekey = (decrypted)

I think these two mods are just to start the card. As I also don't have the other data and I think it's practically "impossible" to get them, I won't be lucky to watch any channel on my enigma2 receiver. But it was worth learning in some forums to do my tests.
Mods only out on ram dump...
 
According to the default settings, I think need:

mod1 =
data50 =
mod50 =
key60 =
exp60 =
nuid =
cwekey = (decrypted)

I think these two mods are just to start the card. As I also don't have the other data and I think it's practically "impossible" to get them, I won't be lucky to watch any channel on my enigma2 receiver. But it was worth learning in some forums to do my tests.
google for HD+_04.txt and you find what you looking for.

Regards
Michael
 
But this not is HD+
Same CAID: 186A, then oscam show as HD+, but other provider.

I only used the oscam.server itself when I downloaded oscam-icam from the feeds, so it showed up as hd+
 
Last edited:
For now I am not sure about mod2, mod1 looks correct in accordance to @adas post. Maybe someone can confirm the correction of data below?

mod1 = 816249639463A9441F505C81FBCZ4B926Z65MJMQ8COMHXQM8PXURVLXE743F40F4BRDE29RXP5QCC2LSODBC2DQBZXCXD6NK1G1MRU4NUMXAHNFBEJHKTZV9HDAL4GFUNBXLPC3BEMKLGAPBF5VWTANQUHOJVBRUJRSPHYEHT0B0E9ADDD01E1C733764B2EFAA1BD53C5DD4F71F610E262683E099

mod2 = D1FBCZ4B926Z65MJMQ8COMHXQM8PXURVLXED3E533B884A04FECCD4B75AFDCBE334DD8EF8025372B01C3D6F926E62D56704BRDE29RXP5QCC2LSODBC2DQBZXCXD6NK1G1MRU4NUMXAHNFBEJHKTZV9HDAL4GFUNBXLPC3BEMKLGAPBF5VWTANQUHOJVBRUJRSPHYEHT0F1CFEECBE9759D57969B1F7E690531246401E2AECCD99B336A415

Regards,
DJWeed
i hope you are not serious 🦧
I'm starting to get migraine

You don't see that there are mistakes in your mods ( The hexadecimal characteristics is 0 to 9 and A to F )

😁🤣
 
I already have the data, I'm waiting for reports.

Cau Adas
 
Hi,

Can somebody help me with finding mod1 and mod2 for UPC Cable Nagra CAK7?

Regards,
DJWeed
Hi
Upc_cablecom_Suiss

Keys mods

Key_mod 1 = 81 62 49 63 94 63 A9 44 1F 50 5C 81 29 D8 79 77 49 CB FA 6C C5 A4 7F A5 6B A6 89 22
37 43 F4 0F 4B 28 A8 85 79 FF DE AB 86 E8 49 76 7D 96 FD EB 16 B6 CD 5D AF 62 F2 2B
1A 4F 4F 5A 8B B8 DA 64 61 61 DC 0C EB E4 8F 06 F4 63 C0 FB 68 A6 4F B6 C2 FE A5 F3
76 0B 0E 9A DD D0 1E 1C 73 37 64 B2 EF AA 1B D5 3C 5D D4 F7 1F 61 0E 26 26 83 E0 99




Key_mod 2 = D1 66 DA E2 99 BB F2 8A A7 46 A6 9D 1F 7B 49 FA 67 2D 3E 53 3B 88 4A 04 FE CC D4 B7
5A FD CB E3 34 DD 8E F8 02 53 72 B0 1C 3D 6F 92 6E 62 D5 67 04 E4 E5 63 C4 34 DB C4
D2 F8 3C CD C7 18 98 EA 9B C2 2D 24 AC 94 0F 3E 19 A6 C7 86 22 33 B4 BA EC 85 C2 8A
6E 0F 1C FE EC BE 97 59 D5 79 69 B1 F7 E6 90 53 12 46 40 1E 2A EC CD 99 B3 36 A4 15
 
@DJWeed and maybe you will need more data too

DATA88: 72C5F550FBDFAE3A0AFFAD433D2988068E760AEB5102D0076E81074767CFF62076FDDAF2684D71E9796A59965D6028D3D8E31D89B11A76691C78BBF85C3ED6452E2C232E1318E1105E784D82283139776E3940418D38376293407FA79BD79493045F03A41FC7F21AD9D8053FB4991A5A66A5D91D9F76BCCB011E715FE3FC896E6CE646C40FC32746

N60: 99A6EDA58B102D1FA914514197ED5762C041CAFA91523EB5DE070566E266987F9DEBA9A2575644F62361BC7620057FB0D359F2A289631A3A4FC0AAD58DC9EA478A493435228FF4C90850AC2939A6DB832D6DE67B433EBA03D0B6687577FD3749

D60: 49A4B3545BB1961F0D97DA5638EE1DAB0C00BCBB99B934AB504E472D87A7AAC1C7BBF2E3073F26F05E06F3201EBAE3F6E86C1FC365EFB20CA791288FA2302B5861B85B2840B9D37D903662CD868C96342959B4942930C390DA41FBBE53569801
 
Last edited:
Back
Top