my dbox is dead :-(

[geeuk]

i had some stripes on my box so i was trying to fix them using the knife trick but the ribbon was loose so i took it out and when i plugged back in the power just got cut and there was a smell...

and suddenly the screen went black now when i plug it in i just get the black dots and the remote light onn


this is the log when i try to flash it
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.202
debug: Sending TFTP-request for file C/ppcboot50754/ppcboot_nullmodem
debug: Got Block #0050
debug: Got Block #0100
debug: Got Block #0150
debug: Got Block #0200
debug: Got Block #0250
debug: Got Block #0300
debug: Got Block #0350
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1c-b6-8b
FLASH: Bus Fault @ 0x01fd4d98, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9fdf8 Machine check signal - probably due to mm fault
with mmu off
NIP: 01FD4D98 XER: E000A07F LR: 01FD4D98 REGS: 01f9fdf8 TRAP: 0200 DAR: F9BFFFAB
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 01FD4D98 01F9FEE8 00000000 00890089 00000000 00900090 00000010 00002088
GPR08: 00001F90 01FE0FC0 FF002808 FF0011C8 00000000 00031B58 01FE7100 01F80000
GPR16: 00000000 00000000 00000000 00000000 20004000 00000001 00000000 00002580
GPR24: FF002FC0 01FC0000 01F9FF40 01FE0FC0 10000000 01FE83DC 0202793C 01FE83DC
Call backtrace:
01FD4D98 01FD47DC 01FCC520 01FC23B0
machine check
### ERROR ### Please RESET the board ###

------ Systeminformations ------
Selected networkdevice: Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler Miniport (0)
IP-address of the networkdevice: 192.168.1.1
IP-address which the dbox gets: 192.168.1.202
Operatingsystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
------ Powered by http://www.dboxservice-hallenberg.de ------

 

[geeuk]

and this is what i get when i try to boot

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-b0.3f.2d.07.00.00-46
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 149536
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Nov 10 2006 - 18:52:56)

CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ........ done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 651106 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 651042 Bytes = 635.8 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

 

[mgb]

If you are playing with the lcd at a powered box you get a good chance to kill cpu or front processor.
I guess more boxes were killed with that method then lcd's repaired.

 

[geeuk]

well i did fix it b4.... i just wanted make a quick fix again as a few lines were coming on

 

[MikeS]

got a box in the same condition m8

it is worthless unless u can buy a cpu from say dboxshop and solder it yourself otherwise it is too costly

 

[geeuk]

i will just buy another one off ebay they have some nice ones with blue lcds..