Hi there to all at digital worldz!
My question is this..
I have a miraclebox 6 HD with Specifications
Tuner & Channel DecoderF-type, IEC 169-24, Female
Input ConnectorF-type, IEC 169-24, Female
Loop through out
Frequency Range950MHz ~ 2150MHz
Input Impedance75Ω, unbalanced
Signal Level-65 to -25dBm
LNB Power13/18VDC, max.400mA
22KHz Tone(22±2)KHz, (0.6±0.2)V
DISEqC ControlV1.0/1.2/USALS Compatible
DemodulationQPSK / 8PSK
Input Symbol Rate2 ~ 67.5 Ms/s(QPSK of DVB-S)
2 ~ 52.5 Ms/s(8PSK of DVB-S2)
FEC Decoder1/2, 2/3, 3/4, 5/6 and 7/8 with Constraint Length K=7(DVB-S)
3/5, 2/3, 3/4, 4/5, 5/6, 8/9 and 9/10 (DVB-S2)
part 10, MPEG-4/AVC and H26L)
MPEG-II ISO/IEC 13818-2/11172-2
MPEG-4/AVC MP@L4, MPEG-II MP@HL
Max. 80Mbit/s
4:3 Letter Box, 4:3 PanScan, 16 : 9
720 x 576i, 720 x 576p, 720 x 480i, 720 x 480p
1280 x 720p, 1920 x 1080i, 1920 x 1080p(supports only HDMI)
Dolby Digital, MPEG-1 Layer 1,2 and 3
Stereo/Joint stereo/Mono, Dolby AC-3
32KHz, 44.1KHz and 48KHz(According to input)
Main SystemSTi chipset
Main ProcessorFlash-ROM : 32 Mbyte
MemorySDRAM : 256 Mbytes
EEPROM : 256 bytes
I then looked online and did much research and came onto this Icecrypt box with the exact same specs
TUNER & CHANNEL DECODER (SATELLITE)
Input Connector F-type, IEC 169-24, Female
Loop through out F-type, IEC 169-24, Female
Frequency Range 950MHz – 2150MHz
Input Impedance 75Ω, unbalanced
Signal Level -65 to -25dBm
LNB Power 13/18VDC, max.400mA
22KHz Tone (22±2)KHz, (0.6±0.2)V
DiSEqC Control V1.0/1.1/1.2/USALS Compatible
Demodulation QPSK/8PSK
Input Symbol Rate 2 – 67.5 Ms/s (QPSK of DVB-S)
2 – 52.5 Ms/s (8PSK of DVB-S2)
FEC Decoder 1/2, 2/3, 3/4, 5/6 and 7/8 with Constraint Length K=7 (DVB-S)
2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 (DVB-S2)
MPEG TRANSPORT STREAM A/V DECODING
Transport Stream H.264 (MPEG-4 part 10, MPEG-4/AVC & H26L)
MPEG-2 ISO/IEC 13818-2/11172-2
Profile Level MPEG-4/AVC MP@L4, MPEG-II MP@HL
Input Rate Max. 80Mbit/s
Video Formats 4:3 Letter Box, 4:3 PanScan, 16:9
Video Resolution 720 x 576i/p,720 x 480i/p,1280 x 720p,1920 x 1080i/p (HDMI)
Audio Decoding Dolby Digital, MPEG-1 Layer 1,2 & 3
Audio Mode Stereo/Joint stereo/Mono, Dolby AC3
Sampling Rate 32KHz, 44.1KHz and 48KHz (according to input)
MAIN SYSTEM
Main Processor STi Chipset
Memory Flash-ROM : 32 Mbytes
SDRAM : 256 Mbytes
EEPROM : 256 Bytes
I would like to use the Icecrypt Firmware on the Miraclebox 6 HD, Both boxes have the exact same specifications. Checked it over 100 times and absolutley everything matches. When I try to update firmware on Miraclebox with the Icecrypt firmware the box does not recognize it. Is there a way around this? The Icecrypt has more support therefore I would like to use it instead. I have also used porter express but it comes up with an error saying, ''unable to open port''
Thanks in advance.
My question is this..
I have a miraclebox 6 HD with Specifications
Tuner & Channel DecoderF-type, IEC 169-24, Female
Input ConnectorF-type, IEC 169-24, Female
Loop through out
Frequency Range950MHz ~ 2150MHz
Input Impedance75Ω, unbalanced
Signal Level-65 to -25dBm
LNB Power13/18VDC, max.400mA
22KHz Tone(22±2)KHz, (0.6±0.2)V
DISEqC ControlV1.0/1.2/USALS Compatible
DemodulationQPSK / 8PSK
Input Symbol Rate2 ~ 67.5 Ms/s(QPSK of DVB-S)
2 ~ 52.5 Ms/s(8PSK of DVB-S2)
FEC Decoder1/2, 2/3, 3/4, 5/6 and 7/8 with Constraint Length K=7(DVB-S)
3/5, 2/3, 3/4, 4/5, 5/6, 8/9 and 9/10 (DVB-S2)
part 10, MPEG-4/AVC and H26L)
MPEG-II ISO/IEC 13818-2/11172-2
MPEG-4/AVC MP@L4, MPEG-II MP@HL
Max. 80Mbit/s
4:3 Letter Box, 4:3 PanScan, 16 : 9
720 x 576i, 720 x 576p, 720 x 480i, 720 x 480p
1280 x 720p, 1920 x 1080i, 1920 x 1080p(supports only HDMI)
Dolby Digital, MPEG-1 Layer 1,2 and 3
Stereo/Joint stereo/Mono, Dolby AC-3
32KHz, 44.1KHz and 48KHz(According to input)
Main SystemSTi chipset
Main ProcessorFlash-ROM : 32 Mbyte
MemorySDRAM : 256 Mbytes
EEPROM : 256 bytes
I then looked online and did much research and came onto this Icecrypt box with the exact same specs
TUNER & CHANNEL DECODER (SATELLITE)
Input Connector F-type, IEC 169-24, Female
Loop through out F-type, IEC 169-24, Female
Frequency Range 950MHz – 2150MHz
Input Impedance 75Ω, unbalanced
Signal Level -65 to -25dBm
LNB Power 13/18VDC, max.400mA
22KHz Tone (22±2)KHz, (0.6±0.2)V
DiSEqC Control V1.0/1.1/1.2/USALS Compatible
Demodulation QPSK/8PSK
Input Symbol Rate 2 – 67.5 Ms/s (QPSK of DVB-S)
2 – 52.5 Ms/s (8PSK of DVB-S2)
FEC Decoder 1/2, 2/3, 3/4, 5/6 and 7/8 with Constraint Length K=7 (DVB-S)
2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 (DVB-S2)
MPEG TRANSPORT STREAM A/V DECODING
Transport Stream H.264 (MPEG-4 part 10, MPEG-4/AVC & H26L)
MPEG-2 ISO/IEC 13818-2/11172-2
Profile Level MPEG-4/AVC MP@L4, MPEG-II MP@HL
Input Rate Max. 80Mbit/s
Video Formats 4:3 Letter Box, 4:3 PanScan, 16:9
Video Resolution 720 x 576i/p,720 x 480i/p,1280 x 720p,1920 x 1080i/p (HDMI)
Audio Decoding Dolby Digital, MPEG-1 Layer 1,2 & 3
Audio Mode Stereo/Joint stereo/Mono, Dolby AC3
Sampling Rate 32KHz, 44.1KHz and 48KHz (according to input)
MAIN SYSTEM
Main Processor STi Chipset
Memory Flash-ROM : 32 Mbytes
SDRAM : 256 Mbytes
EEPROM : 256 Bytes
I would like to use the Icecrypt Firmware on the Miraclebox 6 HD, Both boxes have the exact same specifications. Checked it over 100 times and absolutley everything matches. When I try to update firmware on Miraclebox with the Icecrypt firmware the box does not recognize it. Is there a way around this? The Icecrypt has more support therefore I would like to use it instead. I have also used porter express but it comes up with an error saying, ''unable to open port''
Thanks in advance.