R
rtfm
Guest
Hi - I have a new dbox, when it arrived it had the neutino image, but I tried to reflash it to sportster using IFA - when I do this it start OK, gives the dbox an IP and loads up - the IFA console shows..
***Adapter Desc: Broadcom NetXtreme Gigabit Ethernet - Packet Scheduler Miniport (via IpHlpApi #2)
***MAC address: 00:11:85:85:FB:99 Local IP: 192.168.1.20
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:3B:68:30 (assuming that this is DBox).
BootP> Created dynamic ARP entry for DBoxIP 192.168.1.202 with MAC 00:50:9C:3B:68:30
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "D:\ppcboot10447\ppcboot"...
TFTP> Transfer finished, sent 435 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.1.202 with MAC 00:50:9C:3B:68:30
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "\tftpboot\flash.img"
TFTP> Started TFTP-Transfer for "D:\ppcboot10447\flash.img"...
TFTP> Transfer finished, sent 16129 blocks
The dbox display the "flashing..." image but it gets no further, its connected using a crossover which must be working as it tftp's up the image file, I have also connected a serial cable but that does'nt actually show anything.
Oh - and its now saying kein system if I boot it alone....:SHYTE
The image being used is Sportster1.76.3, the DBOX says multimedia terminal DV3 on the front..
What am I doing wrong?
***Adapter Desc: Broadcom NetXtreme Gigabit Ethernet - Packet Scheduler Miniport (via IpHlpApi #2)
***MAC address: 00:11:85:85:FB:99 Local IP: 192.168.1.20
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:3B:68:30 (assuming that this is DBox).
BootP> Created dynamic ARP entry for DBoxIP 192.168.1.202 with MAC 00:50:9C:3B:68:30
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "D:\ppcboot10447\ppcboot"...
TFTP> Transfer finished, sent 435 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.1.202 with MAC 00:50:9C:3B:68:30
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "\tftpboot\flash.img"
TFTP> Started TFTP-Transfer for "D:\ppcboot10447\flash.img"...
TFTP> Transfer finished, sent 16129 blocks
The dbox display the "flashing..." image but it gets no further, its connected using a crossover which must be working as it tftp's up the image file, I have also connected a serial cable but that does'nt actually show anything.
Oh - and its now saying kein system if I boot it alone....:SHYTE
The image being used is Sportster1.76.3, the DBOX says multimedia terminal DV3 on the front..
What am I doing wrong?