help tm9100 stuck in loop

[marra]

hi ive just done a factory reset on my tm9100 and after the reset it didnt reboot so i had to turn it off myself when i tried to reboot so i could install a new image the box goes into a loop and gets as far as the technomate boot pic your digital partner for life one and the lights go round on the box and then it reboots, please dont tell me ive bricked it unless i totally have thanks, ps i have a sd card if i need to install it that way.

 

[Devilfish]

With the box off, hold the up arrow on the front of the box in and power it on.

You should get a menu with a factory reset option, try that.

If there's a nboot option, try that as well.

You might need to flash via serial.

 

[krazylegz]

fear not marra m8 box is not dead.

do as df said and press the up button whilst powering up the box,but dont bother with the factory reset you'll have to flash by serial..........i had many like that lol.

flash it by serial but put on a original firmware before you put on any other images.(ps by the way it's highly recommended to always flash a original firmware after any 3rd party image has been on and before you put another 3rd party one on)

hope this helps m8