Guides for noobs?

[sasbionage]

hi, are there any guides for noobies on things like Telnet, image types etc,,,?
i've spent days looking for any.(beginners guide doesn't cover these):CRYBABY:

 

[bro]

https://www.digitalworldz.co.uk/posts/1499242/

 

[bro]

first flash that

DGSTATION is World best brand.

then get a program called putty and using your usb stick and putty do this


format usb stick in pc first

1. Boot your DGS image, wait to full boot. when picture comes on
2. Insert your USB stick
3. Telnet to your box, execute mount
4. In the list check - if the /dev/sda2 is mounted (if is FAT probably is mounted to /mnt/usb/usb0)
5. umount it - umount /mnt/usb/usb0
6. now execute fdisk /dev/sda (not sda2)
7. on the prompt press p - to see current partition table
8. press d - to delete partitions, if it is only one proceed, if not - press d again and delete all partitons
9. press p again - there will be no partitons now
10. Press n - to create new partition
11. select p - primary
12. select 1
13. press enter, enter
14. press w to write changes & exit
15. You have just created linux partition on your usb stick
16. Now format this partition - mkfs.ext3 /dev/sda2
17. mount formatted partition again - mount -t ext3 /dev/sda2 /mnt/usb/usb0
18. Now ftp e2 tar.gz to /mnt/usb/usb0
19. execute cd /mnt/usb/usb0
20. execute tar -zxvf e2image.tar.gz, wait few minutes to decompress all. (wait for prompt)
change the red writing bit to the name of the e2 image file you ftp to stick
21. after decompress type, sync


for reciever without hardrive in it


and ftped image file can be deleted of stick when done if you want

 

[sasbionage]

ok m8, do that now,

 

[sasbionage]

just noticed you said for box without hdd,,,mine has a 250g?

 

[sasbionage]

after install DGS it's just getting as far as booting? holding down number buttons gives multiboot1 etc on lcd?

 

[sasbionage]

pls help,,,now i'm stuck at booting?

 

[bro]

sorry mate,heres the way for one with hardrive


++++++++++++++++++++++++++++++++++++++++++
1. Boot your DGS image, wait to full boot.
2. Insert your USB stick
3. Telnet to your box, execute mount
4. In the list check - if the /dev/sdb1 is mounted (if is FAT probably is mounted to /mnt/usb/usb0)
5. umount it - umount /mnt/usb/usb0
6. now execute fdisk /dev/sdb (not sdb1)
7. on the prompt press p - to see current partition table
8. press d - to delete partitions, if it is only one proceed, if not - press d again and delete all partitons
9. press p again - there will be no partitons now
10. Press n - to create new partition
11. select p - primary
12. select 1
13. press enter, enter
14. press w to write changes & exit
15. You have just created linux partition on your usb stick
16. Now format this partition - mkfs.ext3 /dev/sdb1
17. mount formatted partition again - mount -t ext3 /dev/sdb1 /mnt/usb/usb0
18. Now ftp e2 tar.gz to /mnt/usb/usb0
19. execute cd /mnt/usb/usb0
20. execute tar -zxvf e2image.tar.gz, wait few minutes to decompress all. (wait for prompt)
21. after decompress type, sync


to unmount just

cd /
umount /dev/sdb1
++++++++++++++++++++++++++++++++++++++++++++++++++++
Hope this will help you,because it helped me always unpack.Wait a little,15-30 sec, after sync.


to get ur box back on

when totally powered off hold number 3 button on remote control and whilst powering up keep hold of that button for 5 seconds then let go and it will boot to normal image

do that tut above to the letter and when done this time while powering up press the number 2 button for 5 seconds and it will boot to enigma 2

 

[sasbionage]

how do i use telnet?(have already asked)

 

[sasbionage]

ok, have done a google on telnet,,,but i can't turn it on? keeps saying error!! any ideas?

 

[bro]

download program called putty,,,,put in ip addy of reciever then click on telnet then open,,,,,,

put in user = root
then depending what image you got on box,if sifteam image the password is sifteam or any other image the password may be either relook,ipbox or cuberevo

 

[sasbionage]

unce:i have a spare(linux-Ubuntu) pc that i have rarely used? can i format the USB correctly with that?
(quick tut?)

 

[bro]

can try this but dont know if this one would work with cable,you really need to sort out the telnet side of it mate


backup enigma2 0.5.0 full integrated

Features:

- Enigma2 vers 0.5.0

- EMU Manager v1.3 + Extras ACT (the default is set newcs + incubus for the use of tested and working cardreader, incubuscamd.conf03 reserved for newcs then for cardreader, the other two config use them at will if you want to use only the incubus, TESTED OK ...)

- Crossepg 0.3.0 pre9 integrated (can be found in the menu ---> plugin, after running the downloader fato a complete reboot of the machine, already changed rcS ...)

- Plugin SKY TG24 integrated interactive

- Direct plug-integrated interactive goal (to be tested during the championship)

- Plugin integrated interactive sky F1 (to be tested during the formula 1)

- Integrated and tested skin: BrushedAlu-HD, HD-DMM, Ice-Metallic-HD, Kern-HD1, Wine-Metallic-HD, HD-infinityTV

- Driving margen64 to restore the inside of the file

- Program to perform the restoration in the file


enigma2 0.5.0 newbackup.rar

- Lan ip of 192.168.1.7 internal decoder

 

[sasbionage]

thanx bro,,,i WILL sort this telnet!!!:Chainsaw:lol

 

[bro]

no telnet involved in that last image i posted,stick the usb stick in the pc follow the instructions and make sure you dont choose the wrong drive as it will format

 

[sasbionage]

:banana:sorted telnet:Cheers:

 

[sasbionage]

i have tried 3 times now with DGS multiboot img. but the box won't boot afterwards,,,? i have tried holding 3 button in on boot but it gets as far as "booting", it is showing that the multiboot is installed-multiboot3-when button 3 held in etc,,,
any help please?

 

[djheaven]

1: Have yo install img on the flash? Sifteam img, or NBL img.

Then use the Ghost img that Bro show you..

Then turn of the tuner, put the usb in the tuner, turn on the turner, and hold down the number5 buton...

 

[bro]

1) boot from cdkroot
2) boot from USB with hdd
3) original images
4) boot from release
5) boot from USB without hdd
6) boot from SATA hdd
7) boot from flash

 

[sasbionage]

k, will do that,,,thanks.
my mistake,i thought number 3 would boot from the image already on the box!
do i leave the usb in afterwards?