J
Inactive User
waiting on new screen for my slim so cant try this myself for now.
As you know, sony doesn't allow to use interlaced mode while playing games.
It's mean, that all users of SDTV (standard definition TV) aren't able to play their favourite games on TV screen sad
But even if your TV supports progressive scan (aka HDTV), the picture will be not fullscreen.
This's holy sh*t! Let's get rid of this f*ckin limitations with FuSa!
So what does FuSa do?
- It allows you to play games on ANY TV over ANY cable.
( composite, component, svideo, d-terminal )
All kinds of cables are supported!
Besides that, it allows you to play on full screen area!
Understand that? As many of you have seen by experimenting yourself, even with a component cable the TV-out feature of the S&L PSP is woefully supported. Not to mention that you need a High Def TV...our poor CRT portable sets just won't cut it.
Well the clever people at the FuSa project have devised a plugin which shows Sony how to give us what we really wanted with TV-Out. No more borders, no more component cables only, no more expensive TV sets only...Interested?
The bad (-ish) news is that FuSa requires firmwares of 3.80 M33 and up. It will also only run on the Slim and Light (pretty obvious?).
Ready to roll....the question is do i need to rewrite a perfectly adequate guide ? No i didn't think so!
INSTALLATION:
If you have an seplugins folder -
Copy FuSa_SD.prx from the archive into your seplugins folder on your Memory Stick.
Add ms0:/seplugins/Fusa_SD.prx line into your game.txt and pops.txt files.
If you don't have an seplugins folder -
Just copy the seplugins folder from the archive into the root of your memory stick.
Enable the plugin -> Enter the M33 Recovery Menu (R shoulder button at power up from full shut down), select plugins and then enable Fusa_SD.prx for both [Game] and [Pops]
Load a game, wait until it fully loads.
Hold + and - volume buttons to activate FuSa's menu
USAGE:
First of all you need to load the game
TIP
Wait untill it fully loads
When you are there you can launch FuSa.
TIP
Enter HOME screen.
Remove cable and then activate FuSa by holding (-) & (+) volume buttons.
Insert cable and then switch to TV by pressing vol. (-) & R-TRIGGER
Now you can play it on TV's screen, but it's too slow sad
So you need setup priority n FPS.
At first you should setup priority.
Enter FuSa's menu n choose priority setting.
Hold R-TRIGGER to increase scroll speed (10x), now press RIGHT one time - priority will be changed to 86%. Now release R-TRIGGER and press LEFT three times - priority will be changed to 83%
83% is optimal priority value for GTA: VCS n FuSa_1.0.45.
TIP
HOW TO COMPUTE OPTIMAL PRIORITY VALUE
1) Set maximal priority to 99%.
2) Check if the sound stammers.
3) if the sound stammers - decrease priority and return to action 2)
If sound doesn't stammer - congratulation, you've found OPTIMAL PRIORITY VALUE
OK, now when you've done with priority let's skip to FPS.
Enter FuSa's menu and choose FPS setting. Now increase its value until the game will run fine.
TIP
When you reach some value's range, the game will not react to FPS setting - this is optimal fps value.
e.g. For GTA VCS it's 20-30 FPS (26f is optimal)
Now we've done, enjoy the game and don't forget to save optimal values somewhere (for example in your head )
TIP
Switch to PSP's screen before exiting to the XMB by pressing vol. (-) & R-TRIGGER
If the menu doesn't pop-up:
Remove your SEPLUGINS folder and create it again, then repeat installation process.
DOWNLOAD
COMPATIBILITY LIST HERE
As you know, sony doesn't allow to use interlaced mode while playing games.
It's mean, that all users of SDTV (standard definition TV) aren't able to play their favourite games on TV screen sad
But even if your TV supports progressive scan (aka HDTV), the picture will be not fullscreen.
This's holy sh*t! Let's get rid of this f*ckin limitations with FuSa!
So what does FuSa do?
- It allows you to play games on ANY TV over ANY cable.
( composite, component, svideo, d-terminal )
All kinds of cables are supported!
Besides that, it allows you to play on full screen area!
Understand that? As many of you have seen by experimenting yourself, even with a component cable the TV-out feature of the S&L PSP is woefully supported. Not to mention that you need a High Def TV...our poor CRT portable sets just won't cut it.
Well the clever people at the FuSa project have devised a plugin which shows Sony how to give us what we really wanted with TV-Out. No more borders, no more component cables only, no more expensive TV sets only...Interested?
The bad (-ish) news is that FuSa requires firmwares of 3.80 M33 and up. It will also only run on the Slim and Light (pretty obvious?).
Ready to roll....the question is do i need to rewrite a perfectly adequate guide ? No i didn't think so!
INSTALLATION:
If you have an seplugins folder -
Copy FuSa_SD.prx from the archive into your seplugins folder on your Memory Stick.
Add ms0:/seplugins/Fusa_SD.prx line into your game.txt and pops.txt files.
If you don't have an seplugins folder -
Just copy the seplugins folder from the archive into the root of your memory stick.
Enable the plugin -> Enter the M33 Recovery Menu (R shoulder button at power up from full shut down), select plugins and then enable Fusa_SD.prx for both [Game] and [Pops]
Load a game, wait until it fully loads.
Hold + and - volume buttons to activate FuSa's menu
USAGE:
First of all you need to load the game
TIP
Wait untill it fully loads
When you are there you can launch FuSa.
TIP
Enter HOME screen.
Remove cable and then activate FuSa by holding (-) & (+) volume buttons.
Insert cable and then switch to TV by pressing vol. (-) & R-TRIGGER
Now you can play it on TV's screen, but it's too slow sad
So you need setup priority n FPS.
At first you should setup priority.
Enter FuSa's menu n choose priority setting.
Hold R-TRIGGER to increase scroll speed (10x), now press RIGHT one time - priority will be changed to 86%. Now release R-TRIGGER and press LEFT three times - priority will be changed to 83%
83% is optimal priority value for GTA: VCS n FuSa_1.0.45.
TIP
HOW TO COMPUTE OPTIMAL PRIORITY VALUE
1) Set maximal priority to 99%.
2) Check if the sound stammers.
3) if the sound stammers - decrease priority and return to action 2)
If sound doesn't stammer - congratulation, you've found OPTIMAL PRIORITY VALUE
OK, now when you've done with priority let's skip to FPS.
Enter FuSa's menu and choose FPS setting. Now increase its value until the game will run fine.
TIP
When you reach some value's range, the game will not react to FPS setting - this is optimal fps value.
e.g. For GTA VCS it's 20-30 FPS (26f is optimal)
Now we've done, enjoy the game and don't forget to save optimal values somewhere (for example in your head )
TIP
Switch to PSP's screen before exiting to the XMB by pressing vol. (-) & R-TRIGGER
If the menu doesn't pop-up:
Remove your SEPLUGINS folder and create it again, then repeat installation process.
DOWNLOAD
COMPATIBILITY LIST HERE
Last edited by a moderator:
