Feedback for New Test Patch 756P

holmroad

Inactive User
Joined
Sep 21, 2009
Messages
992
Reaction score
774
I tested new patch 756P (Phantom labelled it 'test patch' as follows:-

1) Started off on patch 726P TM6900HD Super
2) Backed up Channel List
3) Factory Reset
4) Loaded patch 756P via USB
(First time TM6900HD Super hung up at end of firmware load process - had to switch stb off/on from rear)
5) Ran Factory Reset again
6) Reloaded new patch 756P
7) Factory Reset again
8) Loaded Backed up Channel List from 2) above
9) 8281 opened lines but not channel, so
10) Loaded 'Add-on', just in case it was that - hadn't NEEDED Add-on on last few patches as Phantom had built it into firmware!
11) All 8281 function working ok SO FAR - but still need to check out SCT HD 13E to see if still freezing, plus 28E issues previously reported on 755P!
(Will report back about this another time)
12) Tested softcam - 7E Digit**k working ok, 19E ORF ok, TNT Sat ok, 23.5E CS Link NOT opening, Bulsat 39E opening ok.
(so CS Sat still only softcam/patch 756P issue here!)
13) 7 day EPG working fine (took 4mins to populate BBC One HD on 28E)
14) PVR working perfectly, it also recorded ok directly from 7 day EPG

15) Blind Scan (espec on 1W) Still to be tested - will report back later!
16) 8280 Biss keys entered on previous patch 726P were all lost, so need re-entering - NOT good!

So, assuming this is based DIRECTLY on old good patch 726P as requested by HORDES of us, so far so good thanks Phantom!

(Still more testing to do - but will report back as & when!):Cool2:
 
New Patch 756P:-

Sorry Phantom, but just found that Blind Scan on patch 756P is STILL stopping at 22% (freq 11675/6V) - just as it did on patches 753P, 755P (both versions) and 013P, whereas on 726P it scanned PERFECTLY, so SOMETHING must need tweaking please!
Regards:Cry:
 
Back
Top