Down load starts using null cable

[chadda]

Thought I had everything right!!!!!

Down load starts using null cable
Turned off all firewalls but get this readout could you through any light
On what I am doing wrong ?????? I am trying to re-flash pacino image file

ûdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
dbox2:root>
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.0.2
IP-Adresse die die dbox bekommt: 192.168.0.202
Comport: Communications Port (COM2)
Betriebssystem: Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
CPU 1: AMD Athlon(tm) Processor @ 900 MHz
Dateiname des Images: pacino_v2.1.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 2.0
------ Powered by http://www.dboxservice-hallenberg.de ------

 

[Napster]

have you set your network card to half duplex and turned off virus scanner

 

[chadda]

have you set your network card to half duplex and turned off virus scanner

thanks for reply
set your network card to half duplex NO !!!!!!!!how do i do that

 

[Napster]

control panel / network connections / righthand click on network card and chosse properties/ you will then see your network card, click on configure/ then \advanced tab and you will find it there

 

[Napster]

will be called linkspeed/duplex mode you need to set to 10tbase half duplex

 

[chadda]

will be called linkspeed/duplex mode you need to set to 10tbase half duplex

Still no joy tried what you said to do
Image working fine on the box. Will a new image just Wright
Over it ?????? The reason I am trying to rein stall the image is that
I scanned the box for up dates but didn’t save bouquets so they all disappeared
Is it poss to just send bouquets to the box?????

 

[Devilfish]

Have a look here...

http://home.arcor.de/pt-1/dboxFAQ/DBox2Faq_v1.63.rar

...and go to Software > Bouquets.xml. It'll tell you all you need to know and more.

People have uploaded their services and bouquets here for other folk to use.

Also have a look at the 'images' section in the helpfile. It will tell you how to flash an image without using ImageFlashAssistant.

There is also a section explaining the 'boot net failed' error you are getting with IFA.