ok after a long time of trying i finally got a box that would not flash over null modem but had the normal hyperterminal boot sequence back to life. Both of the boxes have had the jtag bootloader onto them both are of different types however only the alps tuner will allow the box to boot.
After moving the flash from one box to another the box is now booting. still has the problem with null modem comms not allowing flash. but now the tuner (manual scan option) is gone from the menus. no signal
I could do a flash wizard pro attempt to flash the box but my guess is that this does not over write the bootloader which may be incorrect.
I have not found a different bootloader for different types of tuner sat - cable etc
anyone shine any info on any small part of this
After moving the flash from one box to another the box is now booting. still has the problem with null modem comms not allowing flash. but now the tuner (manual scan option) is gone from the menus. no signal
I could do a flash wizard pro attempt to flash the box but my guess is that this does not over write the bootloader which may be incorrect.
I have not found a different bootloader for different types of tuner sat - cable etc
anyone shine any info on any small part of this