Mornin all,
I gotta p*ce ditv 1000 phase 1b box which i just modded from scratch, to start with I cudn talk to it using libby which i found kinda strange, so I set the net id using the funcard method, after doing so progged an AU funcard for it using the latest V3 files, popped it in the box, powered the STB up and the LCD display just said PACE and my TV screen was stuck on "please wait while STB updates".
I left it in this state for over an hour & it remained the same. I bypassed this loop by using the 1111 method, this allowed me to acces the eng menu again, as I could'nt acces it while it was stuck in the update loop. The card status page revealed a CANNOT DECODE message for the card status but did show the details of the card, like the revision etc.. if I removed the card it also displayed card removed.
I now did a warm reset and managed to get passed the pace and four dashes and then the TV screen displayed the old cr1 epg with the correct time and date but no channel numbers or discription, not even on the STB LCD display.
At this point I tried the 4321 method to force an update and left the data flowing for over 20 minutes, stayed in a constant loop of the same data with and pause now and again followed by and error message stating something along the lines of "NO BAUD FOUND" or something like that.
As that did not work I opened up the box and searched for the anti-update mod but did not find it, I was not expecting to either, as its a fresh box which I had to modify the TB on even. I then tried playing round with the sim module, as I read somewhere that if one applies pressure to it or wedges a card, toothpick or two, pen lid between it, it could help in receiveing the update???
Well as you can probably tell from the above that I've tried allot shit to get this STB working, so if anyone has got any suggestions on wot to try next it would be gr8.
Also is there a special cfg file for these 1000 1b boxes to use in libby, as the cfg file I got for it is not allowing me to talk to the box, I have tried 2 different cfg files. I know I do not have a problem with my scart2serial adaptor, as I can talk to 4000's perfectly using the same device. Any idea's on this would be appreciated too.
Thanks in advance 4 ur time and help
I gotta p*ce ditv 1000 phase 1b box which i just modded from scratch, to start with I cudn talk to it using libby which i found kinda strange, so I set the net id using the funcard method, after doing so progged an AU funcard for it using the latest V3 files, popped it in the box, powered the STB up and the LCD display just said PACE and my TV screen was stuck on "please wait while STB updates".
I left it in this state for over an hour & it remained the same. I bypassed this loop by using the 1111 method, this allowed me to acces the eng menu again, as I could'nt acces it while it was stuck in the update loop. The card status page revealed a CANNOT DECODE message for the card status but did show the details of the card, like the revision etc.. if I removed the card it also displayed card removed.
I now did a warm reset and managed to get passed the pace and four dashes and then the TV screen displayed the old cr1 epg with the correct time and date but no channel numbers or discription, not even on the STB LCD display.
At this point I tried the 4321 method to force an update and left the data flowing for over 20 minutes, stayed in a constant loop of the same data with and pause now and again followed by and error message stating something along the lines of "NO BAUD FOUND" or something like that.
As that did not work I opened up the box and searched for the anti-update mod but did not find it, I was not expecting to either, as its a fresh box which I had to modify the TB on even. I then tried playing round with the sim module, as I read somewhere that if one applies pressure to it or wedges a card, toothpick or two, pen lid between it, it could help in receiveing the update???
Well as you can probably tell from the above that I've tried allot shit to get this STB working, so if anyone has got any suggestions on wot to try next it would be gr8.
Also is there a special cfg file for these 1000 1b boxes to use in libby, as the cfg file I got for it is not allowing me to talk to the box, I have tried 2 different cfg files. I know I do not have a problem with my scart2serial adaptor, as I can talk to 4000's perfectly using the same device. Any idea's on this would be appreciated too.
Thanks in advance 4 ur time and help