Bytes for sammy ex c&w

[pzblues]

hi
i'm tryin to jtag a sammy2100 using bke 2.2, i'm ex c&w netid 41060, i've tried all these bytes and keep getting a snide bk, ird is fine, been doin it all day and am minutes away from stamping all over the box, does anyone have bytes that deffo work? much appreciated...

excw 3_2B
0x00942d24 8

excw 3_3B
0x00974c70 8
or
0x009b5290 8
or
0x00f6a930 8

excw 3_2B
0x00942d24 8

excw 3_3B
0x00974c70 8
or
0x009b5290 8
or
0x00f6a930 8

excw 3_5B
0x0086b9a0 8
or
0x008abfc0 8
or
0x00f69f60 8

byte 0x009004E4 FF
byte 0X00941460 ff
byte 0x008f16b0 ff
byte 0x00931ccc ff
byte 0x00931Be4 12
byte 0x20020004 ff
byte 0x00941464 ff
byte 0x00941460 12

BYTE 0X008ABFC0 8
BYTE 0X0086B9A0 8

 

[Satch]

hi
i'm tryin to jtag a sammy2100 using bke 2.2, i'm ex c&w netid 41060, i've tried all these bytes and keep getting a snide bk, ird is fine, been doin it all day and am minutes away from stamping all over the box, does anyone have bytes that deffo work? much appreciated...

HiYa,

If your on the new VM software then these worked for Someone I helped a few weeks back

BK =0x008ABFC0

BK =0x0086B9A0

On the same netid as well

Just notice you have the extra digits for use with OCD so if your adding them then that would be your problem?

 

[IAmATeaf]

pz - Here's my current list:

For BK

excw 3_2B
0x00942d24 8

excw 3_3B
0x00974c70 8
or
0x009b5290 8
or
0x00f6a930 8

excw 3_5B
0x0086b9a0 8
or
0x008abfc0 8
or
0x00f69f60 8

pure 3_2L & 3_3L
0x00f6a8a8 8

pure 3_5L
0x0086b6b0 8
or
0x008adcd0 8
or
0x00f69af8 8


IRD for all

0x20020004 4

 

[IAmATeaf]

Forgot add wait till the box displays ld14 then press and hold the ch down button for 5 odd seconds, also make sure that OCD isn't running at the time as if it is it'll confuse the box.

 

[pzblues]

Thanks people, will give em a try, i'm using bke not ocd(not sure how ocd works)never tried it.


Update, tried all of these, no joy:CRYBABY: ah well, will keep trying..

 

[IAmATeaf]

Thanks people, will give em a try, i'm using bke not ocd(not sure how ocd works)never tried it.


Update, tried all of these, no joy:CRYBABY: ah well, will keep trying..

OCD is much easier to use, make sure MAC_MOT.sys is loaded and running, use BKE or the DrvLoad.exe to do this, get the box in debug mode, fire up OCD and connect, then simply select a byte address from above and type:

byte 0x00f6a930 8

into OCD, remember that if you do a cut and paste OCD always seems to insert a space character on the end of the line so make sure to backspace/delete it before hitting return.

 

[pzblues]

OCD is much easier to use, make sure MAC_MOT.sys is loaded and running, use BKE or the DrvLoad.exe to do this, get the box in debug mode, fire up OCD and connect, then simply select a byte address from above and type:

byte 0x00f6a930 8

into OCD, remember that if you do a cut and paste OCD always seems to insert a space character on the end of the line so make sure to backspace/delete it before hitting return.

Thanks for that mate, did eventually get a bk it looks like the pins on my jtag are fooked(one has nearly snapped another came loose, bad connection) any idea where i can get a replacement lead?????

 

[joe516]

Thanks for that mate, did eventually get a bk it looks like the pins on my jtag are fooked(one has nearly snapped another came loose, bad connection) any idea where i can get a replacement lead?????

Get hold of Chartman

http://www.fleetcomputersystems.co.uk/

 

[IAmATeaf]

Thanks for that mate, did eventually get a bk it looks like the pins on my jtag are fooked(one has nearly snapped another came loose, bad connection) any idea where i can get a replacement lead?????

Go bare back mate cut the pins off and get out the soldering iron Or do as suggested above.

 

[chookey]

Get hold of Chartman

http://www.fleetcomputersystems.co.uk/

Better known on this forum as Atmelace

Chookey