Blank channels help needed

[wiz569]

So the easiest way would be to get oscam to read it and newcamd to share it using CCcam.cfg?
Doing this means no changes to CCcam.cfg only adding a N line,
Have i read this correct?

Yep Oscam reads,uses newcamd protocol to connect it to CCcam,which then shares as per usual,only then need nline in your CCcam.cfg

Mind you if doing the above on a E1 box its harder as you need Oscam to start first

 

[alimac]

setup in my faithful eagle 500 tucked away in bedroom

use 800 se for viewing

 

[theblueirish]

Have booted up a DM800HD and loaded oscam and cccam, seems to start ok but the picture is blank. this card was working ok the other day although a few entitlements may have expired since. (spare card not used in box).
Can anyone see what the problem is?

2013/11/30 19:32:08 0 s camd35: disabled
2013/11/30 19:32:08 0 s Starting listener 0
2013/11/30 19:32:08 0 s cs378x: disabled
2013/11/30 19:32:08 0 s Starting listener 0
2013/11/30 19:32:08 0 s newcamd: initialized (fd=7, port=10000, crypted)
2013/11/30 19:32:08 0 s -> CAID: 0963 PROVID: 000000
2013/11/30 19:32:08 0 s Starting listener 0
2013/11/30 19:32:08 0 s pandora: disabled
2013/11/30 19:32:08 0 s Starting listener 0
2013/11/30 19:32:08 0 s csp: disabled
2013/11/30 19:32:08 0 s Starting listener 0
2013/11/30 19:32:08 0 s radegast: disabled
2013/11/30 19:32:08 0 s starting thread http
2013/11/30 19:32:08 0 s http thread started
2013/11/30 19:32:08 0 s starting thread reader check
2013/11/30 19:32:08 0 s reader check thread started
2013/11/30 19:32:08 0 s starting thread check
2013/11/30 19:32:08 0 s check thread started
2013/11/30 19:32:08 0 s creating thread for device /dev/sci0
2013/11/30 19:32:08 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/11/30 19:32:08 0 s waiting for local card init
2013/11/30 19:32:08 57D0A0 h HTTP Server listening on port 8888
2013/11/30 19:32:08 57B638 r reader skyuk initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/11/30 19:32:09 57B638 r skyuk card detected
2013/11/30 19:32:10 57B638 r ATR: DELETED BY ME
2013/11/30 19:32:11 57B638 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/11/30 19:32:13 57B638 r [videoguard2-reader] parental lock setting: DELETED BY ME
2013/11/30 19:32:13 57B638 r [videoguard2-reader] type: VideoGuard BSkyB (0963), caid: 0963
2013/11/30 19:32:13 57B638 r [videoguard2-reader] serial: DELETED BY ME, BoxID: DELETED BY ME, baseyear: 1997
2013/11/30 19:32:13 57B638 r [videoguard2-reader] ready for requests
2013/11/30 19:32:13 57B638 r found cardsystem videoguard2
2013/11/30 19:32:13 57B638 r [videoguard2-reader] skyuk card detected
2013/11/30 19:32:13 57B638 r [videoguard2-reader] type: VideoGuard BSkyB (0963)
2013/11/30 19:32:13 57B638 r [videoguard2-reader] tier: 2590, expiry date: 2013/12/13-00:00:00
2013/11/30 19:32:13 57B638 r [videoguard2-reader] tier: 30e3, expiry date: 2013/12/13-00:00:00
2013/11/30 19:32:13 57B638 r [videoguard2-reader] tier: 30e4, expiry date: 2013/12/13-00:00:00
2013/11/30 19:32:13 57B638 r [videoguard2-reader] tier: 30e5, expiry date: 2013/12/13-00:00:00
2013/11/30 19:32:13 57B638 r [videoguard2-reader] tier: b765, expiry date: 2013/12/13-00:00:00
2013/11/30 19:32:13 57B638 r [videoguard2-reader] tier: b766, expiry date: 2013/12/13-00:00:00
2013/11/30 19:32:13 57B638 r [videoguard2-reader] tier: b772, expiry date: 2013/12/13-00:00:00
2013/11/30 19:32:13 57B638 r [videoguard2-reader] tier: b773, expiry date: 2013/12/13-00:00:00
2013/11/30 19:32:13 57B638 r [videoguard2-reader] tier: b860, expiry date: 2014/01/18-00:00:00
2013/11/30 19:32:13 57B638 r [videoguard2-reader] tier: b8bb, expiry date: 2014/01/18-00:00:00
2013/11/30 19:32:13 57B638 r [videoguard2-reader] tier: b8bc, expiry date: 2014/01/18-00:00:00
2013/11/30 19:32:13 57B638 r [videoguard2-reader] tier: b8bf, expiry date: 2014/01/18-00:00:00
2013/11/30 19:32:13 57B638 r [videoguard2-reader] tier: b8f9, expiry date: 2014/01/18-00:00:00
2013/11/30 19:32:13 57B638 r [videoguard2-reader] tier: b994, expiry date: 2013/12/04-00:00:00
2013/11/30 19:32:13 0 s init for all local cards done
2013/11/30 19:32:13 0 s anti cascading disabled

 

[wiz569]

You need to enable dvbapi in oscam.conf,and add a dvbapi user to oscam.user, to be able to watch channels on the same box you are using as a server

oscam.conf

[dvbapi]
enabled = 1
au = 1
user = dvbapiuser
boxtype = dreambox

oscam.user

[account]
user = dvbapiuser
pwd = password
monlevel = 4
keepalive = 1
au =
group = 1

 

[wiz569]

setup in my faithful eagle 500 tucked away in bedroom

use 800 se for viewing

Did you have any trouble getting oscam to start first?

 

[alimac]

no mate

oscam starts first all time

cant remember what image is on it as not hooked to tv for ages

old image uk ready

running sweet as

 

[tross]

wiz569, I currently use CCcam with a paid sub for a cline but some channels have recently stoped working. Some other punters using the same server that I'm subbing to have said they switched to using Oscam and they got the missing channels back. Would that be possible on a DM500s?

 

[alimac]

be possible but would have thought source would need to do it as well

 

[tross]

be possible but would have thought source would need to do it as well

Have read that the problem with some channels missing is something to do with the way the info is sent from the server using CSP. Somthing about the data being in the wrong order which CCcam doesn't detect but Oscam, on the client box, can apparently sort it. I've got a DM500s using the Commando 14.7 image and would like to install Oscam to see if that is the case.

 

[alimac]

have seen no support for csp now

all above me anyways

oscam best for now

 

[theblueirish]

Card trying to decode but doesn't seem to be happening. This is the same result for all channels the example below if LFC tv chosen because it should open even with a FTV card.

Any ideas?


2013/11/30 20:33:42 5A4018 c dvbapi: [ADD PID 0] CAID: 0960 ECM_PID: 0500 PROVID: 000000
2013/11/30 20:33:42 5A4018 c dvbapi: [ADD PID 1] CAID: 0961 ECM_PID: 0500 PROVID: 000000
2013/11/30 20:33:42 5A4018 c dvbapi: [ADD PID 2] CAID: 0963 ECM_PID: 0500 PROVID: 000000
2013/11/30 20:33:42 5A4018 c dvbapi: new program number: CC01 (0960:CC01 unknown) [pmt_list_management 3]
2013/11/30 20:33:42 57B5F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2013/11/30 20:33:42 5A4018 c dvbapi: try pids again #1
2013/11/30 20:33:42 5A4018 c dvbapiuser (0963&000000/0500/CC01/5F:2E23): not found (94 ms) by skyuk
2013/11/30 20:33:42 5A4018 c dvbapi: try pids again #2
2013/11/30 20:33:42 5A4018 c dvbapiuser (0963&000000/0500/CC01/5F:2E23): not found (120 ms) by skyuk
2013/11/30 20:33:43 5A4018 c dvbapi: try pids again #3
2013/11/30 20:33:43 5A4018 c dvbapi: can't decode channel
2013/11/30 20:33:43 5A4018 c dvbapiuser (0963&000000/0500/CC01/5F:2E23): not found (121 ms) by skyuk

 

[Abu Baniaz]

Which version of number oscam are you using?

 

[alimac]

as above need latest version

 

[tross]

have seen no support for csp now

all above me anyways

oscam best for now

That's why I'm trying to install it on my DM500s but so far unable to find any info on how to do it.

 

[theblueirish]

oscam v6611 cardserver+cccam v2.13 I think.

Where can I check and how do I check/change?
Surely even an old version of oscam would open some channels?

 

[wiz569]

oscam v6611 cardserver+cccam v2.13 I think.

Where can I check and how do I check/change?
Surely even an old version of oscam would open some channels?

Older versions require boxid = xx xx xx xx in oscam.server [reader]

Obviously replace xx xx xx xx with your actual boxid/boxkey

 

[Abu Baniaz]

oscam v6611 cardserver+cccam v2.13 I think.

Where can I check and how do I check/change?
Surely even an old version of oscam would open some channels?

Webif of oscam will normally tell you version.

If you have an older version installed, replacing the binary with newer version does the trick. (names must match exactly and it has to be stopped first)

 

[theblueirish]

the web info at the top says: OSCAM 1.20-unstable_svn buil #6611

Is 1.20 not the latest?

 

[wiz569]

the web info at the top says: OSCAM 1.20-unstable_svn buil #6611

Is 1.20 not the latest?

1.20 is the revision 6611 is the version

 

[theblueirish]

ok, I get to here: OScam Download Center
but which version do I need?