Blank channels help needed

Which image are you running on your DM800HD?

Depending on image, it will be one of the mips/tuxbox versions
 
the oscam is reading the box key ok

013/11/30 22:13:56 57B5F0 r [videoguard2-reader] serial: 02xxxxxxx, BoxID: 1xxxxxxx, baseyear: 1997

Think the card might be fecked, can't see how its not even opening liverpool tv
 
theblueirish said:
the oscam is reading the box key ok

013/11/30 22:13:56 57B5F0 r [videoguard2-reader] serial: 02xxxxxxx, BoxID: 1xxxxxxx, baseyear: 1997

Think the card might be fecked, can't see how its not even opening liverpool tv
Click to expand...

OK then is that an OE 1.6 image you are using ?
If so make sure you are using a OE 1.6 oscam version
 
wiz569 said:
OK then is that an OE 1.6 image you are using ?
If so make sure you are using a OE 1.6 oscam version
Click to expand...

Sorry mate, how do I know for sure if its 1.6?
Also where do I put the Oscam.bin when I find download it?
 
Section > mips-tuxbox-oe1.6
Download > oscam-svn9063-mips-tuxbox-webif-Distribution.tar.gz

I suspect it will be located in /usr/bin/softcam. Search for "oscam" while on the root of the internal memory instead of within a folder. Backup your existing version.
 
ok lads and thanks for all the help tonight but i think this is a card issue.
I have just went back to cccam 2.30 and again its not clearing anything.
this was working the other day before it lost some entitlements.
The entiltlements it has lost are the following.
003 27-11-2013
00b 27-11-2013
0010 27-11-2013
001d 27-11-2013
005b 27-11-2013
005c 27-11-2013

I am wondering does the card need to have one of these upto date or the rest will not clear?
I will leave it running over night on cccam to see if it updates.
 
As suspected it must be a card issue, tried another card this morning and got it running ok.

Two quick questions.

1.Should I move c:lines from others from CCcam.cfg to oscam.server? Seems to be working ok without changing anything.

2. Anywhere I can see what clients are connected? i know under casc user I can see 7/7 but is there any way to see who they actually are?


A big thanks to everyone that helped me along the way.
 
If you are still using oscam/Cccam then use the Cccam web info to see connections and don't move any users etc as Cccam is still controlling them :)

Sent from my es209ra using Tapatalk
 
Hi Wiz,
I usually use cs studio to monitor cccam. When I try to connect now i get the error:

Update failed : HTTP/1.1 401 Authorization Required
 
Can you try it in your browser m8

Sent from my es209ra using Tapatalk
 
browser should be fine
 
having a look at his again and got it running ok using an old oscam and ccam, all running ok but still getting the breaking up on RTE channels.
Tried to upgrade the oscam.bin and get these results.

2013/12/13 03:26:11 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9097 (mipsel-unknown-linux-gnu)
2013/12/13 03:26:11 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 29752
2013/12/13 03:26:11 0 s services reloaded: 0 services freed, 20 services loaded, rejected 0
2013/12/13 03:26:11 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/12/13 03:26:11 0 s signal handling initialized
2013/12/13 03:26:11 0 s 37 tier-id's loaded
2013/12/13 03:26:11 0 s 1000 provid's loaded
2013/12/13 03:26:11 0 s newcamd: initialized (fd=7, port=10000)
2013/12/13 03:26:11 0 s -> CAID: 0963 PROVID: 000000
2013/12/13 03:26:11 0 s SKYUK [internal] creating thread for device /dev/sci0
2013/12/13 03:26:11 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/12/13 03:26:11 0 s waiting for local card init
2013/12/13 03:26:11 526258 r SKYUK [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/12/13 03:26:11 527FB0 h webif: decompressed 54698 bytes back into 156344 bytes
2013/12/13 03:26:11 527FB0 h HTTP Server running. ip=0.0.0.0 port=8888
2013/12/13 03:26:12 526258 r SKYUK [internal] card detected
2013/12/13 03:26:13 526258 r SKYUK [internal] ATR: 3F #################
2013/12/13 03:26:13 526258 r SKYUK [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2013/12/13 03:26:13 526258 r SKYUK [internal] Calculated work ETU is 18.60 us reader mhz = 500
2013/12/13 03:26:14 526258 r SKYUK [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/13 03:26:17 526258 r SKYUK [internal] card system not supported
2013/12/13 03:26:17 526258 r SKYUK [internal] Normal mode failed, reverting to Deprecated Mode
2013/12/13 03:26:18 526258 r SKYUK [internal] ATR: 3F ############
2013/12/13 03:26:18 526258 r SKYUK [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2013/12/13 03:26:18 526258 r SKYUK [internal] Calculated work ETU is 74.40 us reader mhz = 500
2013/12/13 03:26:18 526258 r SKYUK [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/13 03:26:21 526258 r SKYUK [internal] card system not supported
2013/12/13 03:26:21 526258 r SKYUK [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2013/12/13 03:26:21 526258 r SKYUK [internal] card initializing error
2013/12/13 03:26:22 0 s init for all local cards done
2013/12/13 03:26:22 0 s anti cascading disabled
2013/12/13 03:26:22 54ED98 c client connected to 10000 port
2013/12/13 03:26:22 54ED98 c encrypted newcamd:10000-client 127.0.0.1 granted (linuxsat, au=on (1 reader))
2013/12/13 03:26:22 54ED98 c user linuxsat authenticated successfully (CCcam)
2013/12/13 03:26:22 54ED98 c AU disabled for user linuxsat
2013/12/13 03:26:25 54ED98 c linuxsat (0963&000000/FFFF/2582/74:496BC905BC73759F3A55A1B8F69BFBFA): rejected group (0 ms) (no matching reader)
2013/12/13 03:27:00 54ED98 c linuxsat (0963&000000/FFFF/CC01/3B:F748970A1A7BB9CC3638EB7F1ADEDEB2): rejected group (1 ms) (no matching reader)


now its not reading the card at all.

Any ideas?
 
not sure if will help your problem mate

but latest versions of oscam seems to be throwing up failures

not connecting etc think its a firewall issue if switch to earlier rev of oscam sorts it again
 
Thanks bhoy, need a upto date version to fix the ssues with the irish channels, think maybe i am downloading the wrong version of oscam. I have downloaded this one:
oscam-svn9096-mips-tuxbox-webif-Distribution.tar.gz
 
problems reported from versions 9082 upwards

reverting to earlier as isaid solves connection issues etc

other than that no idea
 
tried 9081, no different.
One thing I have noticed is that when I change the oscam.bin the reader name changes from skyuk to SKYUK, not sure how to edit it though.

problem appears to start here
2013/12/13 11:17:08 52B008 r SKYUK [internal] card system not supported
2013/12/13 11:17:08 52B008 r SKYUK [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2013/12/13 11:17:08 52B008 r SKYUK [internal] card initializing error
2013/12/13 11:17:08 0 s init for all local cards done
2013/12/13 11:17:08 0 s anti cascading disabled
2013/12/13 11:17:08 54E6B8 c client connected to 10000 port
2013/12/13 11:17:08 54E6B8 c encrypted newcamd:10000-client 127.0.0.1 granted (linuxsat, au=on (1 reader))
2013/12/13 11:17:08 54E6B8 c user linuxsat authenticated successfully (CCcam)
2013/12/13 11:17:08 54E6B8 c AU disabled for user linuxsat
2013/12/13 11:17:12 54E6B8 c linuxsat (0963&000000/FFFF/CC01/5F:F11A6DEB23453D194356A3FCB743664D): rejected group (0 ms) (no matching reader)
 
Last edited:
You must log in or register to reply here.

Similar threads

silverdale
Fire Cube TV no home screen
Replies
5
Views
966
silverdale
silverdale
alimac
Solid Explorer File Manager v2.8.31
Replies
0
Views
218
alimac
alimac
alimac
    • Like
Buttercup 2.5.1
Replies
0
Views
228
alimac
alimac
G
Sensible Topic Cyber Threats from Dave
Replies
0
Views
722
goalseeker
G
joeblaze
some people in twitter now claiming to have found stuff on a way back machine that chinese knew a lot earlier and maybe released it deliberately?
Replies
14
Views
698
joeblaze
joeblaze
Back
Top