Another Way to Flash Your DB 800 or Enigma 2 boxes

[bod]

don't need any serial cable

you have to connect your dreambox trough a rooter or your PC
with USB cable

How to FLASH a new IMAGE
DREAMBOX 800s Using
BOOTLOADER (BROWSER)
..............................
switch of your dreambox from the back button
.........................................


switch on your dreambox from the back button..
at the same time old the lower button
wait till you see the message ***stop***
you will see the IP address of your dreambox.
live your box in that position don't touch anything else

.................................................. ....

now you are ready to upload your IMAGE
.....................................

open your Internet-browser
and put the IP you found from your dreambox
this is a example 10.0.0.153, :
click go..
.................................
will be opened new page with some options
look at the bottom of the page
click on "firmware upgrade"at the bottom of page
......................................

in the nxt page that will be opened through the menu
we will go to browse choose the image NFI to load in the flash.
Finally click on "flash." and wait till the image comes
loaded to 100%, therefore reboot your dreambox.


this been tested by me and work 100 per cent