Any questions * problems * improvements ask phantom

[Phant0m]

Please write your comments clearly also model number of each receiver

 

[thijss26]

for the TM7100/7102 would it be possible to set tuner 2 as the main recording tuner it's kind of anoying when your watching live tv and when a recording starts the tm switches to the channel you have set to record and don't want to watch at that moment and it takes about 2 minutes before you can change back to the channel you want to watch live , this should be possible to happen in the background with tuner two without changing channel on tuner one that you are watching live.

 

[thijss26]

will the 6900/6800 supers and the 7100 get the update for viacces 4

 

[thijss26]

Will streaming be possible on the 6900/6800 super and 7100 series

 

[thijss26]

Could the canaal digitaal nl 19 east patch be added to latest patch updates ? to all models

 

[xxxxxx]

Hi phantom

improvements for TM6800/6900Super

on patch 741p get alot disconnected and freezeing on CCcam + the sound audio sync problems

Canal Digitaal Nederland 19.2East on TM6800/6900Super fine with patch 726p + fine with CCcam + fine with person speech m8

Can you look in to this matter or And perhaps provide solution?

thanks for the continuous support

 

[linsladeboy]

Hi Phantom, regarding Technomate 5402HD patches, is it possible to default audio levels to "high instead of medium" so that we don't have to manually change every channel after patching.

 

[digidude]

Some updated patches for all the models that arent xx02 would be nice

 

[digidude]

an added basic FTP client on ethernet enabled receivers would be nice, even if it can only access attached storage devices. they have games etc that can be run from within the menu system, so an option to 'Start FTP' and another to 'StopFTP' would be a nice feature

 

[Zorch]

Hi PhantOm,

I asked the following question, in regard to a patch improvement, on the 16th March 2011 when I first joined the forum... but I did not get a reply... perhaps you may have not seen my post at that time... so I will respectfully ask the question again...

Q/ If it is at all possible... could PhantOm make a programming amendment to the 'Blind Search' menu in his patches... specifically those patches made for the Technomate HD Super+ models...

I will explain a bit further... eg. when I use my TM 5400 CI USB (non-super) to blind scan Eutelsat W6 at 21.6°E... I can set the S/R to search Fast/Detail/7.5M Over/7.5M Under/3.7M Under...

But when I use my TM 6800 HD Super+ to 'Blind Scan' the same satellite there are no such settings available in the menu for S/R... therefore my TM 6800 HD Super+ scans in nearly all of the frequencies from the (very powerful) neighbouring Astra 3B at 23.5°E... which is a pain...

So... would it be possible for PhantOm to address this issue in his next series of patches...?

Best Wishes,
Zorch

 

[thijss26]

On the Tm6902 i noticed after loading 7day-epg on astra 28.2 east that the now and next refresh is gone again with the latest patch113 could this be put back on any newer patches/updates again ? i moved back to patch 111 and working perfect again

 

[headwest]

On the Tm6902 i noticed after loading 7day-epg on astra 28.2 east that the now and next refresh is gone again with the latest patch113 could this be put back on any newer patches/updates again ? i moved back to patch 111 and working perfect again

Same goes for 6800HD S+. Also interested to know if the non 02 stbs with ethernet will still be developed in future patches? Or would it be best to go 5402?

 

[rogers]

I have two TM6900 non-super receivers (the original ones without ethernet). Is there any chance of a 7-day EPG from Astra 28.2 for these boxes?

Also, when watching channels using an official white card the box randomly stops decoding the channel and usually the only way to get it to decode again is to switch the receiver off and on again. I've had this problem on both boxes for as long as I can remember (years) and over all versions of patches, so it's not specific to one. It makes unattended recording very unreliable. Is this fixable?

Thanks.

 

[popssad]

Phantom,

I have my TM5402hd set up for using newcamd525 on a server but they are saying that I am using cccam can you through any light on this for me .

 

[digidude]

Phantom,

I have my TM5402hd set up for using newcamd525 on a server but they are saying that I am using cccam can you through any light on this for me .

their server will report the can youre using as

NewCamD (Generic)

in your 8281 menu, check that it is set to newcamd protocol on the connection youre using

 

[thijss26]

could we get a explaination/guide on how to use the filtermenu in the "8281" menu or is this working at all ?

 

[chopps]

could we get a explaination/guide on how to use the filtermenu in the "8281" menu or is this working at all ?

I agree. Not much information out there about filters and it would be really useful just to even get some basic information. I've played with the settings for hours, and I'm pretty convinced it's non-functional with cccam on the TM-5402.

chopps

 

[holmroad]

@Phantom:-

Hi mate, is it possible to have a patch for TM series (TM6900HD Super for me!) which enables latest softcam to open all packages on it, especially new Zee TV emu on 13E - plus 'old potatoes' C+ Ned 19E please?:littleang

 

[stpierre]

@Phantom:-

Hi mate, is it possible to have a patch for TM series (TM6900HD Super for me!) which enables latest softcam to open all packages on it, especially new Zee TV emu on 13E - plus 'old potatoes' C+ Ned 19E please?:littleang

Agree with you +TNT Sat 19east + Csat 19east V 022610
No update for my TM 7100HD since ....27-05-2011 !

 

[popssad]

On the TM5402hd does not matter which servers i use I always get either freezing or glitches on both cccam and newcam any chance having a look to see what might be causing it, also this would be heaven if we could get i player to work save the wife busting me brains every time she wants to watch something she missed.

Many Thanks
& thanks for all that you are doing great work