fathertime
Inactive User
- Joined
- Jun 26, 2009
- Messages
- 5
- Reaction score
- 0
Some trouble with running hypercam on a Dbox2 running Commando11 image.
Here is the procedure I am doing:
1) Flash the new Commando-11 image
2) Install /lib/libcrypto.so.0 and /lib/libxmltree.so.0
3) Copy over the hypercam files to the following folders (space is very low now...):
/var/bin/emu/hypercam
/var/bin/hypercam.cfg
/var/bin/hypercam.keys
4) Chmod /var/bin/emu/hypercam to 755
5) Start the hypercam (starts okay)
/emu # /var/bin/emu/hypercam
Starting hypercam V1.06
Settings reloaded
Logs are disabled
6) List running processes to confirm it started (so far so good)
/lib # ps | grep hypercam
3295 root 16176 S /var/bin/emu/hypercam
3296 root 16176 S /var/bin/emu/hypercam
3297 root 16176 S /var/bin/emu/hypercam
3298 root 16176 S /var/bin/emu/hypercam
3299 root 16176 S /var/bin/emu/hypercam
3300 root 16176 S /var/bin/emu/hypercam
3306 root 16176 S /var/bin/emu/hypercam
3314 root 16176 S /var/bin/emu/hypercam
3336 root 1928 S grep hypercam
7) Now leave it for a few minutes and change channel with the remote (hypercam processes just die)
/lib # ps | grep hypercam
3372 root 1928 S grep hypercam
i.e. you can start hypercam but it dies if you change channel! I turned on full logging (level 5) and the output is useless with one line:
[11:41:56:152] Opening log file...
Nothing else in the log.
Any thoughts?
Here is the procedure I am doing:
1) Flash the new Commando-11 image
2) Install /lib/libcrypto.so.0 and /lib/libxmltree.so.0
3) Copy over the hypercam files to the following folders (space is very low now...):
/var/bin/emu/hypercam
/var/bin/hypercam.cfg
/var/bin/hypercam.keys
4) Chmod /var/bin/emu/hypercam to 755
5) Start the hypercam (starts okay)
/emu # /var/bin/emu/hypercam
Starting hypercam V1.06
Settings reloaded
Logs are disabled
6) List running processes to confirm it started (so far so good)
/lib # ps | grep hypercam
3295 root 16176 S /var/bin/emu/hypercam
3296 root 16176 S /var/bin/emu/hypercam
3297 root 16176 S /var/bin/emu/hypercam
3298 root 16176 S /var/bin/emu/hypercam
3299 root 16176 S /var/bin/emu/hypercam
3300 root 16176 S /var/bin/emu/hypercam
3306 root 16176 S /var/bin/emu/hypercam
3314 root 16176 S /var/bin/emu/hypercam
3336 root 1928 S grep hypercam
7) Now leave it for a few minutes and change channel with the remote (hypercam processes just die)
/lib # ps | grep hypercam
3372 root 1928 S grep hypercam
i.e. you can start hypercam but it dies if you change channel! I turned on full logging (level 5) and the output is useless with one line:
[11:41:56:152] Opening log file...
Nothing else in the log.
Any thoughts?
Last edited: