so replace the ethernet with thexover cable nd hopefully i wont get tmp\flash.img no such file or directory wont happen?
no if ur going thru a router, u need a normal ethernet cable
try this.....rodboys method
Turn off windows firewall
Disable wireless network connection
Rename image file mtd3.img and store it in C:\
set Local Area Connection network IP to 192.168.0.201
( IFA automatically sets dbox IP to 192.168.0.202 )
configure Local Area Connection link speed / duplex mode to 10Mbps / half duplex
open IFA
select image for flashing ( mtd3.img from C:\ )
select network device ( there should only be one available )
switch dbox on
press start
a dialogue box pops up
switch dbox off
click ok
switch box on
flashing should begin
progress is indicated on LCD ( IFA image on TV screen )
Fertig and smiley faces on LCD means success
disconnect network
off then on at the mains
The flash process takes three or four minutes.
Note that it might not kick in first time, but this method will flash your box and / or recover from a kein system / loading kernal error.