Which image for a cloned Eurovox

[xion2000]

I'm trying to reflash a friends Eurovox without success.
I thought it was a blue box at first but after opening it up I'm now fairly sure its a clone as similar to an earlier thread the box has some parts which look original (green resisters) and other parts that feature in clones.
Anyway I flashed the latest Blue image but then it found Nothing on the scan (this is what prompted me to investigate further)
I need to know which image I should use please

 

[Mark_The_Yid]

Have you set the right symbal rate? Do a factory reset and choose correct symbal rate for your area.

NTL 6887
TX/Ex C&W 6952

Also, make sure your feed is plugged into correct socket.

If I'm not mistaken you must be using correct firmware or box wont work at all but someone else might want to confirm that or correct me.

 

[xion2000]

Have you set the right symbal rate? Do a factory reset and choose correct symbal rate for your area.

NTL 6887
TX/Ex C&W 6952

Also, make sure your feed is plugged into correct socket.

If I'm not mistaken you must be using correct firmware or box wont work at all but someone else might want to confirm that or correct me.

What is a factory reset?
Thanks for the advise

 

[Mark_The_Yid]

Go to menu, config, clear data. There you will find the factory default setting.

 

[atlanticcoast]

Its obviously not a clone or the latest software would have killed it.