no sound when streaming to pc

[cliveports]

H All,
I've searched everywhere and cant get an answer to this. I can stream easily from my DBOX to my PC with YWeb, VLCRape or NeutrinoTV (tried WinGrabTV but it crashes when I start it) and they're all the same; audio is fine on beeb1 but nothing on SlySPorts1.

Any suggestions..PLEASE!! I wanna watch cricket!!

 

[scooby do]

I have the same problem never got it resolved. Tried loads of different images very very frustrating. I guess it is domething to do with the EMU as non encrypted channels are fine. But what I find strange is the the audio is wrapped up in the TS stream so would have thought that the picture would be missing to. I was hoping someone would post an image that definately works for ALL channels. It works fine on my SAT DBOX! but I cant understand most of the channels anyway!!!!!!

 

[cliveports]

I think its something to do with NAR but dont know what!! I'm sure the clever folk out there have an answer, someone must be watching TV on their PC WITH Sound!!!!!!...............

 

[marra]

i had the same prob with mine in the end i had to reflash the image to my box it just stoped streaming sound for no reason as far as i know

 

[cliveports]

Just reflashed my box and still have the problem so no solution yet! I'lll keep trying!

 

[Fergalsworld]

Just reflashed my box and still have the problem so no solution yet! I'lll keep trying!

What image and version are you using and are you using ucode0014.

 

[cliveports]

using ucode 0014, image is Blade V2.2 Final Nokia 2x

 

[scooby do]

Also use ucode 14. to no avail. Who has this working?

 

[scooby do]

Come on guys who has this working and what are you using etc etc. Starting to think it doesn't work but have hope as it works on my Sat box.

 

[Zoom7000]

I tried all the programs listed too, couldn't get any sound either. Ucode 0014, EvoCamd, MgCamd, Sportster 1.05, 1.07, 1.10 RC006.

No luck with any...

 

[cliveports]

Anyone out there who can help please? I'm sure there must be an answer somewhere!

 

[philburn]

I have for the first time got sound working on my sagem.
I an using Blade Trinity V2 fron Xenefan.
It is set up with GBOX and 0014.
I am using Tuxvision to pick up the stream.
You need to run the trexsetup first, this comes with the Tuxvision program in the downloads section.

 

[cliveports]

Just downloaded Xlivegrabber from the downloads section and Robert is your mothers brother! All channels All Sound...FINALLY! :banana:

So it seems like its down to the application not pulling the audio stream off the box correctly?

 

[DSCANNELL]

Just downloaded Xlivegrabber from the downloads section and Robert is your mothers brother! All channels All Sound...FINALLY! :banana:

So it seems like its down to the application not pulling the audio stream off the box correctly?

Clive, I have been watching this tread with lots of interest Can you share how you got Xlivegrabber working. I am currentl stuck on whic program to use to stream the video.

Thanks in advance

 

[cliveports]

sure, its real easy. download xlive grabber from the downloads section. enter the serial.

Enter the ip of the box in the network settings, then in the playback settings just enter the path to where vlc player lives (so obviously you need to download and install vlc) then just run xlive, it should go to the box, get the bouquets, click on any one of them then click on the play button for the channel you want to watch, wait a few moments an it'll pop up vlc and start playing.

Hope that helps!

Cheers
_______________________________________________________________________
Don't forget to thank those that help !!

 

[McScruff]

i downloaded the lastes jar from the website (im running linux) i can tuen over but i cant get into the config menu to set my path for vlc, anyone had same problem?

 

[scooby do]

still no joy here but now I know someone has it working I will get it working. It is talking to the DBOX fine but nothing when I press the play button

 

[DSCANNELL]

I have the exact same problem as Scooby do. i have tried various version of VLC and even windowsmedia playe as scrrenshots seemed to suggest in some german forums

 

[bobsylas]

sure, its real easy. download xlive grabber from the downloads section. enter the serial.

Enter the ip of the box in the network settings, then in the playback settings just enter the path to where vlc player lives (so obviously you need to download and install vlc) then just run xlive, it should go to the box, get the bouquets, click on any one of them then click on the play button for the channel you want to watch, wait a few moments an it'll pop up vlc and start playing.

Hope that helps!

Cheers
_______________________________________________________________________
Don't forget to thank those that help !!

Spot on m8 thats what Ive done & all channels work :banana:

 

[Zoom7000]

I keep getting the following and can't get a connection to the box:

You don't have permission to view the code content. Log in or register now.

Any ideas? I'm running Sportster 1.10 RC006, MgCamd, 0014. On the initial startup I got the channels listed and connection was fine. But I haven't been able to connect to the box since. I tried ftp and it is working fine.