- Joined
- Nov 17, 2004
- Messages
- 2,634
- Reaction score
- 68
I’ve recently tried to get my DM800HD clone to go behind a VPN. I started by reading around on the internet and stumbled upon the use of OpenVPN. After some digging around, I found that my existing VPN provider already provides *.ovpn files, so I got to work with some guides I found online.
FYI, I have tested my connection to my VPN and can confirm that it is active and working through other devices.
What I did:
Questions:
Btw:
Thanks in advance all
FYI, I have tested my connection to my VPN and can confirm that it is active and working through other devices.
What I did:
1. I installed openvpn onto my box using the following command which was successful: opkg install openvpn
2. I then created my files as per the guides (the method the guide mentioned didn’t connect at all, I had to go by one of the comments which seemed to give back no login error)
4. Opened up a telnet connection via putty (also tried via DCC but same outcome)
5. Executed the following command to start open vpn with the config files: /etc/init.d/openvpn start
6. Observed the following message (uk is the name of the *.conf file): Starting openvpn: uk.
7. Waited a while
8. Ran the following command to see if my IP address was that of the VPN server: wget -q -O - SerdIT Consulting | IP and Proxy test tool. | grep "IP address is"
2. I then created my files as per the guides (the method the guide mentioned didn’t connect at all, I had to go by one of the comments which seemed to give back no login error)
a. Created a *.crt file using the info in the *.ovpn file which included and was between the <ca></ca> tags
b. Created a login.txt file which contains only 2 lines
3. put all the above files into /etc/openvpnb. Created a login.txt file which contains only 2 lines
i. Username
ii. Password
c. Created a *.conf file which contained all of the following (server address masked):ii. Password
Code:
You don't have permission to view the code content. Log in or register now.
4. Opened up a telnet connection via putty (also tried via DCC but same outcome)
5. Executed the following command to start open vpn with the config files: /etc/init.d/openvpn start
6. Observed the following message (uk is the name of the *.conf file): Starting openvpn: uk.
7. Waited a while
8. Ran the following command to see if my IP address was that of the VPN server: wget -q -O - SerdIT Consulting | IP and Proxy test tool. | grep "IP address is"
a. I got a result back which showed that my IP address hadn’t changed
Questions:
1. How can I see what is happening at step 5 when I executed the openvpn program?
Btw:
1. I don’t like the shell on my dreambox, can I upgrade it?
2. Would I need better specs on my box to support a better shell?
2. Would I need better specs on my box to support a better shell?
Thanks in advance all