If your running the OpenPLI gjstroom builds from source you can safely enable on-line updates by making the following changes/edits to the files mentioned. I have tested this and it works fine using the online update option within the image menus. So you can update to latest versions without reflashing your reciever. This is NOT my work, quoted from gjstrooms post on another forum:
Edit the following conf files:
/etc/opkg/all-feed.conf
Code:
src/gz openpli-all http://dl.dropbox.com/u/9860949/dm800se/all
/etc/opkg/dm800se-feed.conf
Code:
src/gz openpli-dm800se http://dl.dropbox.com/u/9860949/dm800se/dm800se
/etc/opkg/mipsel-feed.conf
Code:
src/gz openpli-mipsel http://dl.dropbox.com/u/9860949/dm800se/mipsel
/etc/opkg/3rd-party-feed.conf
Code:
src/gz openpli-3rd-party http://dl.dropbox.com/u/124465398/dm800se/3rd-party
Thanks to Bassie for this feed !
To update your box I recommend to do it in a telnet console, but the gui software update will also work:
Code:
opkg update
opkg upgrade
reboot
Edit the following conf files:
/etc/opkg/all-feed.conf
Code:
src/gz openpli-all http://dl.dropbox.com/u/9860949/dm800se/all
/etc/opkg/dm800se-feed.conf
Code:
src/gz openpli-dm800se http://dl.dropbox.com/u/9860949/dm800se/dm800se
/etc/opkg/mipsel-feed.conf
Code:
src/gz openpli-mipsel http://dl.dropbox.com/u/9860949/dm800se/mipsel
/etc/opkg/3rd-party-feed.conf
Code:
src/gz openpli-3rd-party http://dl.dropbox.com/u/124465398/dm800se/3rd-party
Thanks to Bassie for this feed !
To update your box I recommend to do it in a telnet console, but the gui software update will also work:
Code:
opkg update
opkg upgrade
reboot