I have just borrowed a T911 unlooper from a friend and am having a bit of a play with some original cards that I had lying around. My objective being if I could unloop these and read them then I would do this with another card that I have paired with a samsung box to get BK and do a funcard as I have with my other box. I know it would be easy? to jtag as I have done in the past but I thought I would go for a more non-invasive approach on this one as i've got this unlooper. Anyway, enough of this preamble. let me get to the problem. I have all the neccesary files, scripts, software that I think I need and as far as I can make out the 2 cards have unlooped successfully using winexplorer. (Rom10 A82 & Rom11 B0D). When I try and read either of these cards using nagraedit to my Infinity USB Unltd using the VCP mode (virtual com port) I get this sotr of response :-
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM Revision: 011
EEPROM Revision: RevB0D
SetIFS failed
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM11 failed
Closing of COM1 was successful
So, what I don't know is if this is a result of the cards not unlooping properly or if it is a problem with my programmer set up / nagraedit ? Does anyone have any ideas or thoughts?
Thanks in advance for any help : colors1
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM Revision: 011
EEPROM Revision: RevB0D
SetIFS failed
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM11 failed
Closing of COM1 was successful
So, what I don't know is if this is a result of the cards not unlooping properly or if it is a problem with my programmer set up / nagraedit ? Does anyone have any ideas or thoughts?
Thanks in advance for any help : colors1