[DOWNLOAD] Panasonic PBX Unified Maintenance Console UPCMCv7.8.1.1_R17

Mick

Administrator
Staff member
Administrator
Joined
Jan 19, 1999
Messages
32,153
Reaction score
9,213
Downloads: A new file has been added by Mick:

UPCMCv7.8.1.1_R17

This is the latest version of the Panasonic PBX Maintenance Software.

This software will allow you to administer the PBX and edit all configuration parts on Engineer Mode.

This software supports the following PBX hardware:
KX-TDA15
KX-TDA30
KX-TDA100
KX-TDA100D
KX-TDA200
KX-TDA600
KX-TDE100
KX-TDE200
KX-TDE600


KX-NCP500
KX-NCP1000
KX-NS700
KX-NS1000

This is a management and maintenance build it will allow you to login as an installer on the system and program the systems listed above.

THIS IS SERIOUS SOFTWARE - if you do not know what you are doing leave the system alone - you will break something and we will take no responsibility for your actions!

UPCMCv7.8.1.1_R17



>>> CLICK HERE TO DOWNLOAD Panasonic PBX Unified Maintenance Console <<<


NOTE:
See LINK Below - There has been a new file uploaded here with over 5GB of panasonic files including 2 versions of the unified console:

[DOWNLOAD] Panasonic Unified Maintenance Console Training



PBX Abbreviations, if you do not understand what the menu items mean when programming the unified software then have a look at the abbreviations post here, this will help you in understanding the language used.

PBX Abbreviations for Telecoms System

As mentioned above this is a serious installation software and using it to program your Panasonic phone system is not for newbies, you should have a basic understanding of telephony systems and how they operate.

feel free to leave me some questions about programming if you need help, but I am not an expert some of the configurations is above my knowledge, but I will try and help if I can!

Mick
 
Last edited:
It's the multi version
 
can't download this link, can u sent other link?
 
the answer is no. You need the US version to program a TDA50

- - - Updated - - -

If anyone needs the TDA50 programming software, you can find it here :

[dead link removed]

Enjoy

- - - Updated - - -

Do anyone has up to date files to TVM50?

TIA
 
Last edited by a moderator:
Hi, what are the system requirements for this release? Is it compatible with windows 10x64?
 
I have the following issue when connecting to the PBX console: UB2000B: The maintenance console software cannot connect to the pbx because of the software that van maintain the KX-NCP500/1000 version is not installed to this pc...
 
I have the following issue when connecting to the PBX console: UB2000B: The maintenance console software cannot connect to the pbx because of the software that van maintain the KX-NCP500/1000 version is not installed to this pc...

The software works 100% with the NCP500 as I have it installed and working on my office panasonic system.

Looking at your account you do not have privileges to download on DW yet, so you must be using some other software and not this version.

Regards
Mick
 
Is it possible to register license keys for ns1000 using this tool? I'm new on this. I was looking for a way other than web based maintenance console on the hardware.
 
hello
anyone knows if the development of this software has been stopped?
also, I use it from my laptop which supports touch screen but when I click a dropdown menu, whole program stucks and I have to close it with task manager. The only way to get around with it is to disable touch screen driver, and trust me, it took me days to figure out the problem. (and yes I tried reinstalling-updating drivers with no success)
 
Is it possible to register license keys for ns1000 using this tool? I'm new on this. I was looking for a way other than web based maintenance console on the hardware.

yes you can use this software to install the licences (are you talking about IP phones)?

hello
anyone knows if the development of this software has been stopped?
also, I use it from my laptop which supports touch screen but when I click a dropdown menu, whole program stucks and I have to close it with task manager. The only way to get around with it is to disable touch screen driver, and trust me, it took me days to figure out the problem. (and yes I tried reinstalling-updating drivers with no success)

This is still the latest version :(

Mick
 
yes you can use this software to install the licences (are you talking about IP phones)?

Mick

Thank you Mick. I'm talking about any kind of licences which could be activated on ns1000. I mean I want to know if I could check my license without having the hardware connected. or the software is only an interface which connects the user to the hardware for activation?
 
I'm guessing that this is the correct software for access to programming for a KX-TDA 15, does it also have the ability to download and update the software revision version of the PABX? I don't know yet what version is in the switch, It's come to me as a used system, and I'm about to put it in to replace an older KXTD 816, as the user needs CLI off an analog line, which the 816 can't do.
 
OK, I'm guessing again, I had 3 messages this morning about updates in this thread, but when I logged in they seem to have gone AWOL. I am presuming that they were troll postings, based on the extract that I got in E-mail, and have been removed by the moderators.
 
Back
Top