OK mate.
I am aware that there was an issues probably with the person who set your zgemma up.
Before you go any further YOU WILL NEED TO BACKUP YOUR CAM!!
I can remember before post was removed your cam "Cline" will be in var/etc. (via FTP)
Back that info up as your about to do a fresh setup.
https://www.digitalworldz.co.uk/index.php?resources/4240/
Download the file in the link above. (openvix 4.1)
Now extract that file and copy the "zgemma folder" into a freshly formatted memory key (FAT32 format)
kingston/sandisk low memory keys recommended.
After you copied the file to your memory key, put your memory key in rear USB port then turn box off then on.
Now you will see "FLASH" on front display of box.
After few mins box will reboot.
Once box has "fully" rebooted it is safe to remove memory key.
Connect your HDD to the rear USB port.
Now mount your HDD. From memory you have already formatted it to EXT4. Go to...
MENU.
SETUP.
VIX.
MOUNT MANAGER.
Then mount your HDD. It will ask you to reboot after ALLOW reboot.
(make sure this is done properly or the rest of my guide is useless)
Now you have mounted the HDD you can set your EPG to download to your HDD and set your timeshift to run of the HDD.
Before we go there set your bouquets...
MENU.
SETUP
SERVICE SEARCHING.
AUTOBOUQUETS MAKERS.
PROVIDERS.
(now keep everthing the same! you only thing you need to focus on "sly ROI area" make that ROI HD.
(now "sly uk area" will be the area you live scroll left or right till you find your local area THEN SAVE) BUT MAKE THAT AS SD!!!
Now exit once then go to "autobouquetsmaker config" and only thing you need to change is the time to start and that will be daily at 05:30 then save.
Exit once then do a scan.
(scan must be in autobouquets maker)
After scan go to....
SETUP
SYSTEM
EPG
SETTINGS (epg location /media/hdd) then save it there.
Now exit once then go to crossEPG then config in there set your storage device to your external HDD and scheduled download to 05:45 then save.
Exit once then go down to opentv providers and select 28.2 then save.
Now in crossEPG menu go to "download now" and let it download.
Hopefully all has went well. Now press.....
MENU
SYSTEM
TIMESHIFT SETTINGS
(now set timeshift location to media/hdd/timeshift)
Then auto start timeshift after 30 seconds. Then save.
Exit once then go to "recording play back settings"
Set "default movie location to /media/hdd/movie.
Now reboot box
After you have done that please post if your wanting sly skin.
(that's the easy part)
HOPE THIS HELPS MATE I HAVE GAVE AS MUCH DETAIL AS I COULD.
Also at anytime your zgemma asks you to reboot allow it.
Just incase I missed them.
A couple of we small things might need ironed out after.
But if all has been done your 90% there mate.