samsung hack problem

[deedie]

this is what i have done so far

made the boot floppy with the nforce compatible files on it

run the disc

put in the command mtkflash r/m orig.bin

it says

1:nf4sat1 pri master
2:nf4sat1 pri slave

so i choose 1

all i get after that is

port: 9f0, master/slave: a0

it does nothing else

i have made sure that raid is disabled in bios
i have tried the drive in all sata ports
i tried turning on the xbox then pc and going through it all
tried turning on the xbox just before entering above command

nothing ...... same result every time!!!!

 

[i-zombie]

i think this may be your problem mtkflash r/m orig.bin

try doing it like this mtkflash r /m orig.bin

 

[deedie]

just done the exact same thing

im going to try it on all the sata ports using the command with the space

 

[i-zombie]

have the xbox on when you boot the floppy,but dont connect the sata till your gunna press enter to send the command

 

[deedie]

thats what i was doing

but still the same problem

i have got nothing else plugged into the motherboard like cd drive or hdd

would that make a difference

 

[i-zombie]

well it didnt for me,id left everything plugged in,it is probably a problem with the mtkflash not correctly accepting your chipset,have you edited it correctly

 

[deedie]

havent edited it at all

i used one that said it was for the nforce chipset

i assumed that would work!!

 

[deedie]

http://www.clevermod.com/index.php?article=21

found this guide for doing it...... will give it ago

 

[i-zombie]

yep that a good link for it

 

[deedie]

think is good but i cant really get the info i need from it(i dont understand it very well)

doesnt quite match up to what it should according to the link

pnp device id : acpi\pnpa000\4&4049084c&0
i/0 port : 0x000ffe0-0x0000ffef

pnp device id : pci\vax347s\0000

anybody able to sort that out using the link above??

 

[deedie]

ok......... i was looking at the wrong section of the settings page

here is the right one....... but i still cant figure it out



edit: thats bigger than i expected lol

 

[tianna]

Presss escape, wot does it say ? and are u sure its a samsung drive lol

Boot into dos, then switch the xbox on. make sure the AV cable is plugged in, and in the pc, pull out the ide cables going to any dvd drive etc in the pc... then try.

 

[deedie]

Presss escape, wot does it say ? and are u sure its a samsung drive lol

Boot into dos, then switch the xbox on. make sure the AV cable is plugged in, and in the pc, pull out the ide cables going to any dvd drive etc in the pc... then try.

lol........ of course im sure its a samsung drive. if i got that wrong i would be aswell just giving up now.

tried everything else you say.
when pressing escape it says:- 00 should be 70

 

[inerita]

I have the exact problem.

I ahev a samsung drive. firmware is m25

motherbaord is asus a8n32-sli

freezes here : http://img291.imageshack.us/img291/143/image00034pj8.jpg

ive tried tons of stuff.

what did you do in the end ? or did you giv eup on it ?

Thanks