Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 & 93450 DVD Drives

[wozzo]

Looks like the traces still have to be cut.

After a great deal of requests we have designed a simple switch for all the Liteon drives that enables firmware full read/write. We have also included an On/OFF Led to show correction operation when switching to 0x72 vendor mode.


The installation is very simple and takes about 60 seconds if you have some small experience with a soldering iron. It has been tested with the original DOSFLASH methods and also the new Jungle Flasher 0.1.69. All Liteon drive version have been tested with 100% Success. There is no need to remove the LT Switch after it has been installed - simply switch to normal mode.


On Sale Now £4.95 / $7.95

 

[Highlander]

looks interesting, getting closer to no cut tracks

 

[Oggy]

You never had to cut tracks, you could lift the pins on the controller itself.

I personally can not see where the selling point of this is.

Traces/Via's still need lacquer removing

Traces still need cut

Soldering still required ...

So you still need to do what I consider "The hard part" so to speak, all it does is save you rejoining cuts after ??

If youve done the above, soldering a couple of wires isnt beyond you.

All in my opinion of course.

Oh, and the name? :S

 

[dibbers]

with me being the modding n00b i was wondering what this will allow you to do, does it mean that all liteon's can now be flashed....sorry i didn't want to ask but if i do then it will put other people's minds at rest! lololol

 

[janobi]

with me being the modding n00b i was wondering what this will allow you to do, does it mean that all liteon's can now be flashed....sorry i didn't want to ask but if i do then it will put other people's minds at rest! lololol

Im with you dibbers, this means nothing to me. lol.

 

[DOOBIE]

that makes 3 of us then i thought cutting tracks was a dj thing lool

 

[bilabonic]

Its for the latest Liteon F/w drives. I have come across two so far. You are unable to read them.

You have to access the bottom of the board, cut tracks add a resistor/switch and operate at certain times in Jungleflash.

The above pcb seems pointless tbh.


See here - Boxxdr Method For Complete Lite-on Firmware Dump. - Scenyx Entertainment Community

Guess this will be popping up regularly soon

roud: