tonedeff's EPG

[graham27]

Ok has anyone got a tut on how to set this up?? I have tried, I want it to run off my usb port????
Not botherd witch EPG i use i just want the easy-ist one to set up?
Thanks

 

[ToneDeff]

Plug USB into rear USB port > Open My Panel

EPG Options > -MultiView EPG Options > -Install MultiView EPG > -Set MultiView Install Location

> Create /mmc/mv/ - Do Before Install
> Set MV to use /mmc/mv/ - Do Before Install

> Install MultiView EPG...
> WeekEPGLog is used to get Data... / Or install WeekEPGlog from plugins

> -Set How Many Days MV Grabs

> Update MultiView EPG Data Now...

Then Just Choose MV from yellow button plugins list.

could you give me some feedback as to why you couldn't get it working ?
was hoping i'd made it as simple as possible, while still giving decent amount of options

 

[graham27]

right i have the epg installed ,like i did before, but its not saving any epg info to the usb stick, its made the folder on the usb stick but no saved epg data,so when i open MV it works but its blank?

 

[wiz569]

right i have the epg installed ,like i did before, but its not saving any epg info to the usb stick, its made the folder on the usb stick but no saved epg data,so when i open MV it works but its blank?

Have you done the bit below,
if so did it throw up any errors?

> Update MultiView EPG Data Now...

 

[graham27]

Have you done the bit below,
if so did it throw up any errors?

Right when i update, at the top it says [ on: unknown operand... Is that right?
All the rest downloads , below fine! then when i open mvepg a warning comes up!!!>>>>>>( WARNING: INPUT NAME HAS NO DEFINITION: RADIOUK)

 

[ToneDeff]

Right when i update, at the top it says [ on: unknown operand... Is that right?
All the rest downloads , below fine! then when i open mvepg a warning comes up!!!>>>>>>( WARNING: INPUT NAME HAS NO DEFINITION: RADIOUK)

this isn't right

[ on: unknown operand...

think that error is coming from the recording/standby checks... they get checked via the web interface using localhost...

see if you can view > http://box.i.p/cgi-bin/status

you using a TM500 ?

also that inputs error is being cause by having my BBC radio EPG data enabled but not having the Dir for it... did you update any of the cfgs form panel or just isntall MV ?

 

[graham27]

this isn't right

[ on: unknown operand...

think that error is coming from the recording/standby checks... they get checked via the web interface using localhost...

see if you can view > http://box.i.p/cgi-bin/status

you using a TM500 ?

also that inputs error is being cause by having my BBC radio EPG data enabled but not having the Dir for it... did you update any of the cfgs form panel or just isntall MV ?

Hi mate its stopped this " on: unknown operand..."
http://192.168.1.7.p/cgi-bin/status < tried that but its not working!

I have TM600 mate!!

I have update cfgs from your panel..

been playing round over last 2 days, tried new usb sticks
Do i have it formated by the box or leave fat32?
tried both ways, under fat nothing loads on usb after updata epg!

could you update you epg then upload it on here from yr usb???

 

[wiz569]

If possible m8 you would be better off starting from scratch,
Do a factory reset,make sure to back up your channel lists and any cfg that you have first,then send them back to the box when factory reset is done,

then plug the usb into the rear port and format it through the box,
then follow word for word the steps in tonedeff's post #2,

If that works for you then when in the MV epg you can press the menu button and map any missing channels through the "Alias manager" option.

Lets know how that goes please

 

[ToneDeff]

Hi mate its stopped this " on: unknown operand..."
http://192.168.1.7.p/cgi-bin/status < tried that but its not working!

I have TM600 mate!!

I have update cfgs from your panel..

been playing round over last 2 days, tried new usb sticks
Do i have it formated by the box or leave fat32?
tried both ways, under fat nothing loads on usb after updata epg!

could you update you epg then upload it on here from yr usb???

http://192.168.1.7/cgi-bin/status <

should be ext2.... UR images only have ext2 support afaik...

what do you mean by

could you update you epg then upload it on here from yr usb???

i'm not going to start uploading EPG data to site

 

[graham27]

http://192.168.1.7/cgi-bin/status <

should be ext2.... UR images only have ext2 support afaik...

what do you mean by i'm not going to start uploading EPG data to site

I men't as a one off mate!

 

[graham27]

If possible m8 you would be better off starting from scratch,
Do a factory reset,make sure to back up your channel lists and any cfg that you have first,then send them back to the box when factory reset is done,

then plug the usb into the rear port and format it through the box,
then follow word for word the steps in tonedeff's post #2,

If that works for you then when in the MV epg you can press the menu button and map any missing channels through the "Alias manager" option.

Lets know how that goes please

Think thats looking like the best way, to go now mate!!!!!