TM 5402 HD CI+ Super+ CNDF (BOTH) DiSEqC & USALS 03.05.2013

[Zorch]

Hi again all,

TM 5402 HD CI+ Super+ CNDF (BOTH) DiSEqC & USALS 03.05.2013

Updated all Transponders on all active Satellites 30.0°W > 60.0°E

Thanks to Flysat/KingOfSat/Lyngsat

Added new Satellites/Deleted old Satellites
Added FEC's on DVB-S2 Transponders only
All DVB-S transponder FEC's reset to AUTO
No Feed Transponders (except on satellites with no actual channels)
No Internet/Data Stream Transponders
Separated some 'Fringe' Satellites for better dish positioning/alignment
All unused (empty) Satellite slots de-activated

All active satellites now set to (BOTH) DiSEqC & USALS positioning systems

Added a 'Read Me' file
Guide for setting up USALS Positioning on TM 5402 HD

Thanks to digi247 for his assistance

The CNDF file should also be compatible with the TM 6800 HD Super+

PLEASE BE AWARE
There are no TV/Radio channels stored in the CNDF file

Please make a back-up copy of your own CNDF file before you try this one

Best Wishes,
Zorch

 

[Zorch]

Addendum:

I used NDFEdit 1.66 to change the 'Motorized Setting' configuration within the CNDF file to (BOTH) DiSEqC & USALS ...therefore this should (hopefully) enable members who have initially set up their receiver/motor using the DiSEqC positioning system to also be able to access the USALS positioning system.

Please correct me if this is wrong... as I can't check this myself.

NB
The MUTV transponder on Eutelsat 10A at 10.0°E needs to be changed from the one listed in my CNDF file... I have it listed as...

11.647 V [1613] 5/6 DVB-S2 8PSK

However mdt indicates in the following post...

good news, mutv has re-appeared back on 10east but at 11.547.v.1613 using the same system as before,regards mdt

thanks to @marokino08

I hope this helps...

Best Wishes,
Zorch

 

[Julezy]

Hi Zorch,
Many thanks for this,

I've been trying for a while (without any success) to see if its possible to use Clarke Tech or NDFEdit to 'copy and paste' my existing 'Favourites' List from my CNDF file into another CNDF file with all active transponders.
I thought I'd ask the experts now
Is this possible to do ? or would I have to re-create my list of favourites again ?

Cheers
Julezy

 

[chopps]

You can copy and paste between cndf/favourites if you open 2 seperate instances of Clarke Tech Editor Studio. I often do a full arc scan, then copy my favs from my old cndf. Pretty sure you can't do it with the simpler NDFedit.

I don't have the program to hand, but hilight the contents of a favourite menu, then right click copy. right click and paste it into the new fav, on the first empty line. I can check this if my memory is not correct, let me know when you tried it.

 

[Julezy]

Cheers ! thanks chopps, had a very quick go at that and think i've got it working, that'll be really useful

 

[cringle]

thanks Zorch.