Viewing as a guest? Click here to register and download
>>-}} Updated Firmware (known as a Patch firmware) found in other posts below {{-<<
~#~ Brand new channel list at bottom of page. If your reciever is set up for USALS (and your dish and motor set correctly) this will give you over 3000 channels on 26 satellites without you having to do a single thing ~#~
*******Easy guide for patching Technomate1500 (all other models very similar) *******
1) First, download the files that you need which is the 'loader v1.6' and the latest 'firmware'. You will find these in the posts below.
2) You need to unzip the files to a folder you will remember, like 'my documents'.
3) Go to the folder and double click on the unzipped - 'TMLoader'. This will start the software that links to the Technomate.
4) Make sure your Technomate and pc are connected via the null-serial cable, and that your receiver is 'turned off' by the power switch at the rear. ie. No Power on the receiver.
5) In the TMLoader software click on the 'Browse' button and locate your unzipped firmware file, using the explorer window, and double-click the file.
6) In the TMLoader software you now need to click 'connect' and now switch your receiver power ON at the rear.
7) Loading of your firmware now starts, so wait until it has finished (writing and erasing).
8) When it has completely finished you need to switch power off, disconnect your null-serial lead, then turn back on again by using the power switch at the rear.
Thats it, all done, nice and simple. You should now be able to enjoy your latest firmware patch.
>>-}} Updated Firmware (known as a Patch firmware) found in other posts below {{-<<
~#~ Brand new channel list at bottom of page. If your reciever is set up for USALS (and your dish and motor set correctly) this will give you over 3000 channels on 26 satellites without you having to do a single thing ~#~
*******Easy guide for patching Technomate1500 (all other models very similar) *******
1) First, download the files that you need which is the 'loader v1.6' and the latest 'firmware'. You will find these in the posts below.
2) You need to unzip the files to a folder you will remember, like 'my documents'.
3) Go to the folder and double click on the unzipped - 'TMLoader'. This will start the software that links to the Technomate.
4) Make sure your Technomate and pc are connected via the null-serial cable, and that your receiver is 'turned off' by the power switch at the rear. ie. No Power on the receiver.
5) In the TMLoader software click on the 'Browse' button and locate your unzipped firmware file, using the explorer window, and double-click the file.
6) In the TMLoader software you now need to click 'connect' and now switch your receiver power ON at the rear.
7) Loading of your firmware now starts, so wait until it has finished (writing and erasing).
8) When it has completely finished you need to switch power off, disconnect your null-serial lead, then turn back on again by using the power switch at the rear.
Thats it, all done, nice and simple. You should now be able to enjoy your latest firmware patch.
Last edited:
