Dream Unlocker
Inactive User
1.Connect STB to PC by null cable
2.Start up STB editor
3.Click on tools
4.Goto code/si ( code = image / si = channel data )
5.A box will come on
6.Click on CODE/SI(By LOADER & K-TABLE)
7.Click on send
8.Click on open
9.Click on the factory data from your PC
10.Make sure you are on the right com & FTA MODEL
11.Turn off your STB by the plug
12. Click on start and then turn on plug at stb and it will start to send the data to the STB
13 Wait untill the STB turn back on
__________________________________________________ _______________
Send data from STB to PC(channel list)
Best if you can do this with the STB connect to the TV but can be done without.
1.Turn on STB
2.Press menu
3.Press OK (Installation on TV)
4.Press four 0 (If you have change this but in your code. If you have turn it off just goto step 5)
5.Press DATA DOWNLOAD
6.Press OK
8.Select data download or channel data
9.On your computer start up STB editor
10.Click on download
11.A box will come on
12.Press SI/CODE ( si receive = channel data / code receive = image )
13.Click on Receive
14.Click on open and but a name for the factory date file
15.Change to right com port & FTA MODEL
16. Know press OK from step 8 and wait for CH in the window of STB
17.Press start on STB editor and it will start sending the data to your computer
And that it.
2.Start up STB editor
3.Click on tools
4.Goto code/si ( code = image / si = channel data )
5.A box will come on
6.Click on CODE/SI(By LOADER & K-TABLE)
7.Click on send
8.Click on open
9.Click on the factory data from your PC
10.Make sure you are on the right com & FTA MODEL
11.Turn off your STB by the plug
12. Click on start and then turn on plug at stb and it will start to send the data to the STB
13 Wait untill the STB turn back on
__________________________________________________ _______________
Send data from STB to PC(channel list)
Best if you can do this with the STB connect to the TV but can be done without.
1.Turn on STB
2.Press menu
3.Press OK (Installation on TV)
4.Press four 0 (If you have change this but in your code. If you have turn it off just goto step 5)
5.Press DATA DOWNLOAD
6.Press OK
8.Select data download or channel data
9.On your computer start up STB editor
10.Click on download
11.A box will come on
12.Press SI/CODE ( si receive = channel data / code receive = image )
13.Click on Receive
14.Click on open and but a name for the factory date file
15.Change to right com port & FTA MODEL
16. Know press OK from step 8 and wait for CH in the window of STB
17.Press start on STB editor and it will start sending the data to your computer
And that it.
