problems with mgcamd

[wiz569]

I have been since I started using CCcam, but I thought using mgcamd with the "multiple" option, would be a dam sight easier when the PW change
one of them has 35 ports :O

Why does the PW keep changing?? Or am I missing something?

Your not using lines found on google I hope?

 

[no1baggiesfan]

I thought all those lines on google were fake/scams or stuff ?

 

[no1baggiesfan]

OK, I think I fixed it, first up, anyone looking for a nice looking image to use on a tm twin, look for the HDfreaks image, OMG, it is bloody gorgeous, much better than those drab vix and pli images, it works too LOL.

ok, back to my problem, I deleted the "CWS_INCOMING_PORT = 21000" in the newcamd.list and POP, its now working, fingers crossed

 

[slyboxhd]

hello
no1baggiesfan

if you want to use Mgcamd on any image for TM without problems try one iv work'd on ( pm email and ill send it, cant upload at mo??? ) if it dont work ill eat my hat

 

[slyboxhd]

I thought all those lines on google were fake/scams or stuff ?

they are, would stay away, most could give you a viurus or spiwear latch-on, if it look's to good to be true it is not true and stay away no matter wot! if you have ever try'd one make sure you dont have spiwear on your laptop/pc if you dont know how to look for this pay some one that can and should only cost about £20 to £40 but will stop some one reading your bank, if you dont know wot to look for you would never know it was there till you have lost the lot.
hope this helps

 

[no1baggiesfan]

hello
no1baggiesfan

if you want to use Mgcamd on any image for TM without problems try one iv work'd on ( pm email and ill send it, cant upload at mo??? ) if it dont work ill eat my hat

I'm currently using (and loving) the HDfreaks image, it installs the cams with a config, I have it working ok now, after I rem'd that one line it has worked perfectly.

 

[slyboxhd]

sweet glad to hear its working :dance:

 

[slyboxhd]

hello
no1baggiesfan

if you want to use Mgcamd on any image for TM without problems try one iv work'd on ( pm email and ill send it, cant upload at mo??? ) if it dont work ill eat my hat

@wiz569
i can send you this file if you could put it up for others to use it?
cheers

 

[wiz569]

@wiz569
i can send you this file if you could put it up for others to use it?
cheers

You can m8 but it might be better explaining what you have done, I presume you have not altered the mgcamd binary so it's just your config,

If so just paste it here m8,if there's more to it then by all means pm me

 

[no1baggiesfan]

HO Hum, back to the vix image lol, nothing wrong with the HDfreaks image, just no downloadable EPG, (epg refresh is a joke), nice image, looks fantastic and it works very nicely, but, wifey needs the EPG LOL

 

[slyboxhd]

HELLO
ALL

hears is my configer of mg-cfg, all you have to do is delete everything in your mg.cfg file and copy past this info in to the mg.cfg and then save and restart enigma and then restart soft cam and your done, have test's on vix/4d/aaf/sattvhelp
hears wot you need to copy and paste:


# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# # default is 01
F: { 00 }





hope this helps

ps iv just noticed that one of the code lines are showing as a smile ie like this so when you have the info pasted over to the mg.cfg file you will have to change that smile back to it just being a :&) not a smile, because this site work's with smiles i cant change it unless @wizz might be able to fix it?