I've had another look at this as I'm still getting problems with these channels.
You're quite right, they're all on the same Transponder (Network ID). I've rescanned just now and most of the discover channels have been picked up, although strangely Animal Planet wasn't. So, I'm looking at three channels that behave in different ways: Discovery Turbo, Discovery Realtime +1 and Bravo (as my baseline to check that everything is working).
Bravo is fine, works without fail regardless of the CSA module I choose in vPlug.
Discovery Turbo doesn't work at all. In the vPlug monitor I get nothing in the CA-Info window and I get the following lines in the Debug output window:
[15/11/2008 17:53:08] dvbviewer3.9.4.0
iscovery Turbo - Added PMT filter, pid=$0800
[15/11/2008 17:53:08] dvbviewer3.9.4.0
iscovery Turbo - Cached ECM-PID:-1($FFFFFFFF)
[15/11/2008 17:53:08] dvbviewer3.9.4.0
iscovery Turbo - freq:107, tp_id=$0001, SID=$03F1, PMT=$0800
[15/11/2008 17:53:08] dvbviewer3.9.4.0
iscovery Turbo - StartECM_Filt-> $FFFFFFFF
[15/11/2008 17:53:11] dvbviewer3.9.4.0
iscovery Turbo - Timeout on ECM-PID: $FFFFFFFF
[15/11/2008 17:53:11] dvbviewer3.9.4.0
iscovery Turbo - -> empty pid -> starting AutoECM...
[15/11/2008 17:53:11] dvbviewer3.9.4.0
iscovery Turbo - StartECM_Filt-> $FFFFFFFF
[15/11/2008 17:53:15] dvbviewer3.9.4.0
iscovery Turbo - PMT Pid =$0800, SID =$03F1
[15/11/2008 17:53:15] dvbviewer3.9.4.0
iscovery Turbo - Timeout This PID is empty. Rescan...
In view -> filters -> DVBSource I get nothing. Everything is sat at 0. My latency is 350, the TV/Raio box is set to 500 and the File box is set to 0. I'm on Graph PTS and Auto Update. I'm assuming it's not any of those as they're the same as on working channels.
With discovery Realtime + 1 I get the relevant lines appearing in the CA-Info window with the top one going blue and the the icon changing from a key to an unlocked padlock. In the debug output I get:
[15/11/2008 18:00:36] dvbviewer3.9.4.0
iscovery Realtime +1 (NA - Added PMT filter, pid=$0107
[15/11/2008 18:00:39] dvbviewer3.9.4.0
iscovery Realtime +1 (NA - Cached ECM-PID:6712($1A38)
[15/11/2008 18:00:39] dvbviewer3.9.4.0
iscovery Realtime +1 (NA - freq:123, tp_id=$001F, SID=$03F7, PMT=$0107
[15/11/2008 18:00:39] dvbviewer3.9.4.0
iscovery Realtime +1 (NA - StartECM_Filt-> $1A38
[15/11/2008 18:00:45] dvbviewer3.9.4.0
iscovery Realtime +1 (NA - Timeout on ECM-PID: $1A38
[15/11/2008 18:00:45] dvbviewer3.9.4.0
iscovery Realtime +1 (NA - -> empty pid -> starting AutoECM...
[15/11/2008 18:00:45] dvbviewer3.9.4.0
iscovery Realtime +1 (NA - StartECM_Filt-> $1A38
[15/11/2008 18:00:46] dvbviewer3.9.4.0
iscovery Realtime +1 (NA - AutoECm->Found ECM-PID: $1A38
I get no audio or video and in view -> filters -> dvbsource I now have a clock (PCR) value and my allocated buffers has moved to 2. My discontinuities is rising by about 2 every five seconds.
Does that mean anything to anyone? Is it something that can be fixed?
Sorry for the long post but I though as much information as possible would be useful!