C
cornz
Guest
Just a quick note, Using a clanzer build 5. All working correctly until i decided to use a printer swich box..
Both programmer and printer would work but the resutant cards failed to program properly although the software reported no problems.Even reading the codes from the card provided no clues as they read as programmed.
Solved problem by removing the switch box.
So if youre having problems, try removing the switch box if you have one.
The one i have is a manual push switch. Its possible that different types (electronic or rotary make break before make types) might cause this problem...
Both programmer and printer would work but the resutant cards failed to program properly although the software reported no problems.Even reading the codes from the card provided no clues as they read as programmed.
Solved problem by removing the switch box.
So if youre having problems, try removing the switch box if you have one.
The one i have is a manual push switch. Its possible that different types (electronic or rotary make break before make types) might cause this problem...
