what software came with it ? just found this
Gold Wafer Card Programming (16f84 + 24c16) <br />Software Required: Icprog, Winphoenix.<br />Data Files Required: Pic16f84 hex, 24c16 hex, Loader Hex.
SETUP<br />Install Icprog and setup as described in the Icprog / Winphoenix setup document.<br />Choose ‘PIC16F84’ from the drop down device box.<br />LOADER STAGE<br />Press File/Open and select your ‘loader’ hex file from your chosen directory.<br />Put the Maximus Multi-programmer© into ‘Ludi’ mode – (switch OUT).<br />From the window press the ‘Program All’ button.<br />The data will now be written to the card and verified. All progress boxes should clear if OK. If you receive a verification error at this stage you will need to check the configuration of the programmer and software. Refer to the Icprog / Winphoenix setup document.
EEPROM STAGE<br />Open Winphoenix programming software.<br />Select File/Load from the menu and choose your 24c16 eeprom hex file.<br />Put the Maximus Multi-programmer© into ‘Multi-mouse’ mode – (switch IN).<br />Select Card/Program from the menu.<br />Winphoenix will test the presence of the programmer and the validity of the card and program the data. When completed and verified it will give a ‘Programmed OK’ message. Close Winphoenix.
[ 16 March 2002: Message edited by: damage34 ]</p>