666
Inactive User
- Joined
- Mar 17, 2005
- Messages
- 934
- Reaction score
- 6
hi guys helping my dad, he just got a iconnecter, i flashed it like this.
Loading software to
KRYPTViEW ArnEt
You will not get any channels until this part has been completed in FULL
Using the RS232 cable connect the box to the back of your computer
Plug the KRYPTViEW ArnEt into the mains power supply
Make sure The KRYPTViEW ArnEt displays 0000 on the front of the box
Double click the KRYPTViEW ArnEt loader (it looks like a grey satellite dish)
The loader will open
Click the green download button
Another box will open saying Code Send
Click Open…
Click on KRYPTViEW SOFTWARE once, so it is highlighted
Then click the Open button
This file will now appear File box
Click Start in the loader box then immediately press the RED button half way down the remote control TWICE, then the STANDBY button at the top left hand corner of the remote. (Red circle with a line at the top)
So its START-RED-RED-STANDBY
The software will start downloading
The display on the front of the KRYPTViEW ArnEt will have a green line going round and round
Wait until it says Download Success !
Congratulations you have now programmed your KRYPTViEW ArnEt
Now plug it into your TV, Choose your Provider e.g. NTL, T/W etc and scan for channels.
and with this file Kryptview_A780_18062010
then i scaned for my area, then plugged in iconnecter restertrd everything , but all i get it scrambled channels, any idea what i,m doing wrong...thanks
Loading software to
KRYPTViEW ArnEt
You will not get any channels until this part has been completed in FULL
Using the RS232 cable connect the box to the back of your computer
Plug the KRYPTViEW ArnEt into the mains power supply
Make sure The KRYPTViEW ArnEt displays 0000 on the front of the box
Double click the KRYPTViEW ArnEt loader (it looks like a grey satellite dish)
The loader will open
Click the green download button
Another box will open saying Code Send
Click Open…
Click on KRYPTViEW SOFTWARE once, so it is highlighted
Then click the Open button
This file will now appear File box
Click Start in the loader box then immediately press the RED button half way down the remote control TWICE, then the STANDBY button at the top left hand corner of the remote. (Red circle with a line at the top)
So its START-RED-RED-STANDBY
The software will start downloading
The display on the front of the KRYPTViEW ArnEt will have a green line going round and round
Wait until it says Download Success !
Congratulations you have now programmed your KRYPTViEW ArnEt
Now plug it into your TV, Choose your Provider e.g. NTL, T/W etc and scan for channels.
and with this file Kryptview_A780_18062010
then i scaned for my area, then plugged in iconnecter restertrd everything , but all i get it scrambled channels, any idea what i,m doing wrong...thanks